/live/media/DE/DE_TC4160_FRO.JPG)
Delphi TC4160 Suspension Ball Joint - Front Lower
| Brand | Delphi TC4160 |
|---|---|
| Position | Front Lower |
| Maximum Outside Diameter | 1.969 |
| Maximum Outside Diameter | 50.00 |
| 10667 | No |
| Thread Direction | Counterclockwise (left) |
| Reinforced | No |
| Pre-Greased | Yes |
| Castle Nut Included | No |
| Grease Fitting Included | No |
| Suspension Grade Type | Standard replacement |
| Bushings Included | No |
| Dust Boot Included | Yes |
| Ball Joint Assembly | Yes |
| Type | Standard |
| Cotter Pin Included | No |
| Cotter Pin Hole | No |
| Mounting Hardware Included | Yes |
| Washers Included | No |
| Grade Type | Standard replacement |
| Adjustable | No |
| Bearing Type | Plastic |
| Greaseable | No |
| Stud Thread Length | 0.862 |
| Stud Thread Length | 21.90 |
| Steering Type | Power |
| Stud Type | Threaded |
| Mounting Type | Press-in |
| Dust Boot Material | Rubber |
| Mounting Bolts Included | No |
| Mount Plate Included | No |
| Tapered Stud | Yes |
| Fits | Hyundai · 4 vehicles |
OE-inspired engineering. Delphi applies original-equipment expertise to its aftermarket steering and suspension parts.
Extreme-condition tested. Built to handle subzero cold, high heat, and long salt-spray exposure.
Front lower fitment. Standard replacement ball joint for the front lower suspension position.
Cross-references Mevotech Supreme MK9855, MOOG Chassis Products K9855 and 54503-34A00 for the same application. See all 6.
Delphi TC4160 Front Lower Ball Joint
Delphi TC4160 is a standard replacement suspension ball joint for the front lower position on select Hyundai Sonata models. Built with OE-focused dimensional and material analysis, it is engineered for consistent fitment and dependable steering and suspension performance.
Key Features
- Fits 1995-1998 Hyundai Sonata, front lower
- Standard replacement ball joint assembly
- Press-in mounting type for the front suspension
- Pre-greased design with a sealed rubber dust boot
- Counterclockwise (left) thread direction
- Includes mounting hardware
- Plastic bearing type with tapered stud construction
- Delphi part number TC4160
Product Details
Delphi TC4160 is a front lower suspension ball joint built for the Hyundai Sonata from 1995 through 1998. It uses a press-in design, a threaded stud, and a tapered stud profile to match the original suspension geometry. The unit is pre-greased and sealed with a rubber dust boot to help protect the joint from contamination during normal road use. Delphi applies OE-level dimensional and material analysis to support proper interchange with the original part, and this part cross-references MOOG Chassis Products K9855 and Mevotech Supreme MK9855 for the same application.
Common Repair Applications
- Front-end looseness or play in the lower suspension joint
- Clunking or knocking from the front suspension over bumps
- Uneven tire wear related to worn ball joint geometry
- Steering wander or reduced directional stability
- Service replacement for a worn front lower ball joint on a Hyundai Sonata
Installation Notes
Fits 1995-1998 Hyundai Sonata, front lower. This is a press-in ball joint, so proper suspension service tools are typically required for removal and installation. Verify left-thread orientation, stud taper, and mounting dimensions before assembly. Always confirm vehicle year and position against the existing part and suspension layout before final installation.
Quality Assurance
Delphi subjects its OE-style steering and suspension components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure testing. TC4160 is built to meet standard replacement expectations for fit and durability in everyday driving conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1998 | Hyundai | Sonata | Front Lower | — |
| 1997 | Hyundai | Sonata | Front Lower | — |
| 1996 | Hyundai | Sonata | Front Lower | — |
| 1995 | Hyundai | Sonata | Front Lower | — |
| No rows match your filter. | ||||