/live/media/DE/DE_TC4184_FRO.JPG)
Delphi TC4184 Suspension Ball Joint - Front Upper
| Brand | Delphi TC4184 |
|---|---|
| Position | Front Upper |
| Maximum Outside Diameter | 1.634 |
| Maximum Outside Diameter | 41.50 |
| 10667 | No |
| Thread Direction | Counterclockwise (left) |
| Reinforced | No |
| Pre-Greased | Yes |
| Castle Nut Included | Yes |
| Grease Fitting Included | No |
| Suspension Grade Type | Standard replacement |
| Bushings Included | No |
| Dust Boot Included | Yes |
| Ball Joint Assembly | Yes |
| Type | Standard |
| Cotter Pin Included | Yes |
| Cotter Pin Hole | Yes |
| Mounting Hardware Included | No |
| Washers Included | No |
| Grade Type | Standard replacement |
| Adjustable | No |
| Bearing Type | Plastic |
| Greaseable | No |
| Stud Thread Length | 0.768 |
| Stud Thread Length | 19.50 |
| Steering Type | Power |
| Stud Type | Threaded |
| Mounting Type | Press-in |
| Dust Boot Material | Rubber |
| Mounting Bolts Included | No |
| Mount Plate Included | No |
| Tapered Stud | Yes |
| Fits | Hyundai · 5 vehicles |
OE expertise. Delphi brings original-equipment know-how to its aftermarket steering parts.
Extreme testing. Built to handle subzero cold, high heat, and 720 hours of salt spray.
Front upper fit. Press-in ball joint with pre-greased, sealed construction for service-ready installation.
Cross-references Beck/Arnley 101-4977, Dorman - Premium BJ60006XL and Mevotech Supreme MS90512 for the same application. See all 6.
OE-Style Front Upper Ball Joint
Delphi TC4184 is a standard replacement suspension ball joint for the front upper position on select Hyundai applications. It is built with OE-focused dimensional and material analysis to support proper fit and consistent steering and suspension performance on the 2005-2007 Hyundai Sonata and 2006-2007 Hyundai Azera.
- Front upper suspension ball joint
- Standard replacement grade
- Press-in mounting type
- Pre-greased for installation
- Dust boot included with rubber boot material
- Castle nut and cotter pin included
- Counterclockwise (left) thread direction
- Plastic bearing type
- Power steering application
- Threaded, tapered stud design
Detailed Product Overview
Delphi TC4184 is engineered as an OE-style suspension ball joint for the front upper location. It features a press-in design, a pre-greased assembly, and a rubber dust boot to help protect the joint from contamination. The threaded stud uses a tapered profile, and the included castle nut and cotter pin support a complete service replacement for the specified Hyundai Sonata and Hyundai Azera fitments. Delphi validates its steering and suspension parts through temperature and corrosion exposure testing to help maintain OE-level performance expectations in demanding conditions.
This part cross-references MOOG Chassis Products K500036 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Excessive play in the upper suspension joint
- Uneven tire wear related to worn steering geometry
- Loose or imprecise steering feel
- Visible boot damage or joint contamination
Installation Notes and Tips
Fits 2006-2007 Hyundai Azera, Front Upper. Fits 2005-2007 Hyundai Sonata, Front Upper. Because this is a press-in ball joint, proper removal and installation tools are recommended to avoid damage to the control arm or joint bore. Verify left-hand thread direction, stud taper, and orientation before final assembly. Always confirm alignment after suspension service.
Quality Assurance
Delphi applies OE-focused testing and dimensional analysis to help ensure consistent fit and performance. This includes exposure to extreme temperatures and extended salt-spray testing to evaluate durability in harsh operating conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Hyundai | Azera | Front Upper | — |
| 2007 | Hyundai | Sonata | Front Upper | — |
| 2006 | Hyundai | Azera | Front Upper | — |
| 2006 | Hyundai | Sonata | Front Upper | — |
| 2005 | Hyundai | Sonata | Front Upper | — |
| No rows match your filter. | ||||