/live/media/DE/DE_TC5076_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5076 Suspension Ball Joint - Front Lower
| Brand | Delphi TC5076 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Gray |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 4.016 |
| Item Grade | Standard Replacement |
| Length | 102 |
| Length | 416 |
| Material | Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 |
| Maximum Outside Diameter | 2.362 |
| Maximum Outside Diameter | 60.0 |
| Mount Plate Included | No |
| Mounting Bolts Included | No |
| Mounting Hardware Included | Yes |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Taper Per Foot | 0.167 |
| Stud Tapered End 1 Diameter | 0.843 |
| Stud Tapered End 1 Diameter | 21.4 |
| Stud Tapered End 2 Diameter | 0.677 |
| Stud Tapered End 2 Diameter | 17.2 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 1.043 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | Yes |
| Width | 60.0 |
| Fits | Jeep and Dodge · 21 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Press-in design. Includes mounting hardware, washers, and nuts for installation.
Alloy steel ball. Carbon steel housing and a dust boot add durable construction.
Cross-references Dorman - Premium BJ96135XL, MAS Industries BJ96135 and MOOG Chassis Products K80629 for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC5076 Front Lower Ball Joint
The Delphi TC5076 is a standard replacement suspension ball joint built for front lower applications on select Jeep and Dodge models. It combines OE-focused dimensional control with durable materials to support precise suspension movement and consistent steering response.
Key Features
- Front lower suspension ball joint assembly
- Press-in mounting type for the specified applications
- Ball material: Alloy Steel SAE 5140
- Housing material: Carbon Steel SAE 1040
- Dust boot included with Chloroprene Rubber (CR) construction
- Stud type: threaded, tapered stud design
- Standard replacement grade
- Mounting hardware, nuts, and washers included
- Greaseable: No; Adjustable: No
Detailed Description
Delphi applies OE engineering experience to its aftermarket steering and suspension portfolio, and the TC5076 reflects that approach with careful dimensional and material analysis for proper part-to-vehicle matching. The ball joint is tested for demanding temperature and corrosion exposure, including operation below -40 degrees C and above 120 degrees C, plus extended salt spray exposure. That focus on durability and fit makes it a practical choice for Jeep Grand Cherokee, Jeep Commander, Jeep Liberty, and Dodge Nitro front lower suspension service.
This Delphi TC5076 ball joint uses a press-in design with a tapered, threaded stud and a protective dust boot to help maintain joint integrity in everyday road conditions. It is a direct replacement-style component for front lower suspension repair on 2005-2010 Jeep Grand Cherokee, 2006-2010 Jeep Commander, 2008-2012 Jeep Liberty, and 2007-2011 Dodge Nitro. This part cross-references MOOG Chassis Products K80629 for the same application.
What It Is Used For
- Replacing a worn front lower ball joint on Jeep Grand Cherokee, Jeep Commander, Jeep Liberty, or Dodge Nitro
- Restoring tighter steering feel after suspension looseness develops
- Addressing clunking, popping, or knocking from the front suspension
- Correcting uneven tire wear caused by excess front-end play
- Supporting proper wheel alignment after suspension wear is found
Installation Notes and Tips
Fits 2005-2010 Jeep Grand Cherokee, front lower. Fits 2006-2010 Jeep Commander, front lower. Fits 2008-2012 Jeep Liberty, front lower. Fits 2007-2011 Dodge Nitro, front lower. Verify press-in fitment, stud taper, and thread specifications before installation. Because this is a suspension service part, inspect related control arm and alignment components during repair, and follow the vehicle manufacturer’s service procedure for pressing and torque specifications.
Quality Assurance
Delphi backs this suspension ball joint with OE-oriented engineering, material selection, and validation testing for temperature and corrosion resistance. The TC5076 is built to meet standard replacement needs while maintaining compatibility with the listed front lower applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Jeep | Liberty | Front Lower | — |
| 2011 | Dodge | Nitro | Front Lower | — |
| 2011 | Jeep | Liberty | Front Lower | — |
| 2010 | Dodge | Nitro | Front Lower | — |
| 2010 | Jeep | Commander | Front Lower | — |
| 2010 | Jeep | Grand Cherokee | Front Lower | — |
| 2010 | Jeep | Liberty | Front Lower | — |
| 2009 | Dodge | Nitro | Front Lower | — |
| 2009 | Jeep | Commander | Front Lower | — |
| 2009 | Jeep | Grand Cherokee | Front Lower | — |
| 2009 | Jeep | Liberty | Front Lower | — |
| 2008 | Dodge | Nitro | Front Lower | — |
| 2008 | Jeep | Commander | Front Lower | — |
| 2008 | Jeep | Grand Cherokee | Front Lower | — |
| 2008 | Jeep | Liberty | Front Lower | — |
| 2007 | Dodge | Nitro | Front Lower | — |
| 2007 | Jeep | Commander | Front Lower | — |
| 2007 | Jeep | Grand Cherokee | Front Lower | — |
| 2006 | Jeep | Commander | Front Lower | — |
| 2006 | Jeep | Grand Cherokee | Front Lower | — |
| 2005 | Jeep | Grand Cherokee | Front Lower | — |
| No rows match your filter. | ||||