/live/media/DE/DE_TC5377_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5377 Suspension Stabilizer Bar Link - Rear Left
| Brand | Delphi TC5377 |
|---|---|
| Position | Rear Left |
| Material | Ball pin - steel |
| Length | 5.512 |
| End 1 Type | Male |
| End 2 Type | Male |
| Bushings Included | No |
| Dust Boot Included | Yes |
| Width | 2.559 |
| Washers Included | No |
| Height | 2.874 |
| Height | 73.0 |
| Grade Type | Performance |
| Bolts Included | No |
| Housing Material | Steel |
| Greaseable | No |
| Weight | 0.71 |
| Bearing Material | Polyoxymethilen (pom) |
| Wrench Size | 0.197 |
| Wrench Size | 5.0 |
| Distance Between Mounting Holes | 105.0 |
| Locking Nuts Included | Yes |
| Item Grade | Standard replacement |
| Fits | Nissan · 6 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the aftermarket part.
Steel construction. Ball pin and housing are built for durable performance.
Dust boot included. Helps protect the joint from contamination.
Cross-references Beck/Arnley 101-7099, 56261-1AA0B and K750285 for the same application. See all 3.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear Left Stabilizer Bar Link for Murano
Delphi TC5377 is a rear left suspension stabilizer bar link built for OE-style replacement on the 2009-2014 Nissan Murano. It combines a steel ball pin, steel housing, and a POM bearing material with a dust boot to support consistent sway bar connection and suspension response.
Delphi applies OE-level dimensional and material analysis to help match the original part, and each link is tested across extreme temperatures and salt spray exposure for durability in demanding road conditions.
Key Features
- Part number: TC5377
- Position: rear left
- Material: steel ball pin with steel housing
- Dust boot included for added joint protection
- Locking nuts included
- Performance grade, standard replacement item
- Distance between mounting holes: 105.0 mm
- End 1 type: male; End 2 type: male
Detailed Description
This Delphi suspension stabilizer bar link is engineered for the rear left side of the Nissan Murano and is intended to restore the connection between the sway bar and suspension assembly. The TC5377 uses a steel ball pin and polyoxymethylene (POM) bearing material to support smooth articulation, while the steel housing adds strength in a compact OE-style design. Delphi’s manufacturing process emphasizes dimensional accuracy and material matching to help maintain proper fit and function on the 2009-2014 Nissan Murano.
This part cross-references Beck/Arnley 101-7099 for the same application.
What It Helps Address
- Clunking or rattling from the rear suspension
- Excessive sway bar movement over bumps and turns
- Loose or worn stabilizer link joints
- Uneven rear-end handling response
- Noise caused by deteriorated dust protection at the joint
Installation Notes and Tips
Fits 2009-2014 Nissan Murano, rear left. Confirm the mounting-hole spacing and end style before installation, and compare the original link length and orientation to the replacement part. The included locking nuts support installation, and the dust boot should be inspected during service to help protect the joint from contamination.
Quality Assurance
Delphi validates this stabilizer bar link through temperature exposure below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray testing. That OE-focused testing supports durability for daily driving and long-term suspension service on the Nissan Murano. Part number TC5377 is built as a standard replacement for the rear left position.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2014 | Nissan | Murano | AWD | Rear Left | — |
| 2013 | Nissan | Murano | AWD | Rear Left | — |
| 2012 | Nissan | Murano | AWD | Rear Left | — |
| 2011 | Nissan | Murano | AWD | Rear Left | — |
| 2010 | Nissan | Murano | AWD | Rear Left | — |
| 2009 | Nissan | Murano | AWD | Rear Left | — |
| No rows match your filter. | |||||