/live/media/DE/DE_TC5403_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5403 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC5403 |
|---|---|
| Position | Front |
| Bearing Material | Plastic |
| Bolt Head Diameter | 12.0 |
| Bolt Length | 35.0 |
| Bolt Thread Diameter | 0.47 |
| Bolt Thread Diameter | 12.0 |
| Bolt Thread Size | 12 |
| Bolts Included | No |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Grade Type | Regular |
| Greaseable | No |
| Height | 3.543 |
| Height | 90.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 5.039 |
| Length | 128.0 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 0.23 |
| Width | 40.0 |
| Width | 68.0 |
| Fits | Hummer · 7 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Steel construction. Built with ball joints and a dust boot for dependable suspension movement.
OE performance testing. Endures extreme temperatures and 720 hours of salt spray.
Cross-references Dorman - Premium SL90285PR, Mevotech Original Grade GS50875 and Mevotech Supreme MS50875 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC5403 Front Stabilizer Bar Link
Delphi TC5403 is a front suspension stabilizer bar link built with steel construction and ball joint ends for OE-style steering and suspension service. It is engineered for direct replacement use on select Hummer H3 and H3T applications, including front-end repairs where worn sway bar links create noise or looseness.
Key Features
- Steel housing and link construction
- Ball joint ends at both connection points
- Dust boot included for joint protection
- Standard replacement grade
- Front position application
- Locking nuts included
- Non-greaseable design
Detailed Description
Delphi TC5403 is a front suspension stabilizer bar link designed to restore proper connection between the stabilizer bar and suspension assembly. Delphi applies OE-focused dimensional and material analysis to help maintain fit and function, and the part is tested for demanding temperature and corrosion exposure conditions. This makes it a practical replacement for front sway bar link service on 2006-2010 Hummer H3 and 2009-2010 Hummer H3T models. The Delphi TC5403 uses steel construction, ball joint ends, and a protective dust boot to support consistent suspension articulation.
This part cross-references MOOG Chassis Products K750185 for the same application.
Common Issues It Can Help Address
- Front-end clunking or rattling over bumps
- Excess play in the stabilizer bar connection
- Uneven sway bar response during cornering
- Worn or damaged front stabilizer link joints
- Corrosion-related suspension link deterioration
Installation Notes and Tips
Install on the front suspension only. Verify bolt thread size and mounting dimensions before installation, and inspect the stabilizer bar bushings, control arm hardware, and adjacent joints while the vehicle is apart. Because this link is non-greaseable, routine service focuses on inspection for wear, boot damage, and looseness rather than lubrication.
Quality Assurance
Delphi validates aftermarket steering and suspension parts using OE-based dimensional and material analysis, along with temperature and salt-spray testing to evaluate durability under harsh conditions. Fits 2006-2010 Hummer H3, front and 2009-2010 Hummer H3T, front.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Hummer | H3 | Front | — |
| 2010 | Hummer | H3T | Front | — |
| 2009 | Hummer | H3 | Front | — |
| 2009 | Hummer | H3T | Front | — |
| 2008 | Hummer | H3 | Front | — |
| 2007 | Hummer | H3 | Front | — |
| 2006 | Hummer | H3 | Front | — |
| No rows match your filter. | ||||