/live/media/DE/DE_TC5473_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5473 Suspension Ball Joint - Front Left or Front Right
| Brand | Delphi TC5473 |
|---|---|
| Position | Front Left |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Black |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 2.36 |
| Height | 60.0 |
| Item Grade | Standard Replacement |
| Length | 115 |
| Material | Steel |
| Maximum Outside Diameter | 2.24 |
| Maximum Outside Diameter | 57.0 |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 0 |
| Mounting Type | Press In |
| Nuts Included | No |
| Position(s) | Front Left, Front Right. For the position specific to your vehicle, refer to the Application tab. |
| Stud Thread Diameter | 0.63 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 1.08 |
| Stud Thread Length | 27.5 |
| Stud Thread Pitch | 1.5 |
| Suspension Grade Type | Standard |
| Type | Threaded |
| Washers Included | No |
| Width | 59.9 |
| Fits | Nissan and INFINITI · 20 vehicles |
Standard replacement. OE-style ball joint assembly for dependable suspension service.
Steel construction. Built with a dust boot and cotter pin for added durability.
OE expertise. Delphi applies dimensional and material analysis for compatibility.
Cross-references Beck/Arnley 101-7664, Beck/Arnley 101-8041 and Dorman - Premium BJ61035XL for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Suspension Ball Joint
Delphi TC5473 is a threaded suspension ball joint built for front left and front right applications on select Nissan 350Z and INFINITI G35 models. It combines steel construction, a dust boot, and standard replacement dimensions to support precise steering and suspension movement.
Delphi applies OE-focused dimensional and material analysis to its aftermarket steering and suspension portfolio, with testing that includes extreme temperature exposure and extended salt-spray resistance. The result is a front suspension ball joint engineered for consistent fitment on the Nissan 350Z and INFINITI G35 platform.
- Steel construction with a black finish
- Threaded design with press-in mounting type
- Dust boot included; chloroprene rubber (CR) boot material
- Castle nut and cotter pin included
- Standard replacement, non-adjustable, non-greaseable design
- Front left and front right positions
- Delphi part number TC5473
Detailed Product Information
Delphi TC5473 is a suspension ball joint assembly for front suspension service on 2004-2009 Nissan 350Z and 2004-2007 INFINITI G35 applications. It is built as a standard replacement part with a threaded stud, press-in mounting style, and a dust boot to help protect the joint interface from road contamination. The steel body and OE-oriented dimensional checks support proper alignment with the original suspension geometry.
This part cross-references Beck/Arnley 101-7664 and Dorman - Premium BJ61035XL for the same application. Delphi TC5473 is a direct-fit option for front suspension repair on the Nissan 350Z and INFINITI G35 platform when the original ball joint shows wear or looseness.
Common Problems This Part Can Address
- Front-end clunking or popping over bumps
- Excessive play in the front suspension joint
- Steering looseness or wandering
- Uneven tire wear caused by worn suspension geometry
- Noise or vibration from a deteriorated ball joint
Installation Notes and Tips
Fits 2005-2009 Nissan 350Z, front right and front left. Fits 2004 Nissan 350Z, front right and front left, from 08/2004. Fits 2005-2007 INFINITI G35, front right and front left. Fits 2004 INFINITI G35, front right and front left, from 08/2004.
Confirm the vehicle’s build date and front suspension position before ordering. Because this is a press-in style ball joint, proper suspension service tools and a professional alignment after installation are recommended. Verify the stud thread diameter, thread pitch, and mounting style against the original part before installation.
Quality Assurance
Delphi uses OE-focused engineering, dimensional analysis, and material validation to support fit and function across its aftermarket steering and suspension parts. TC5473 is tested for harsh temperature exposure and corrosion resistance to help maintain performance in demanding road conditions.
| Year | Make | Model | Body Type | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|
| 2009 | Nissan | 350Z | — | — | Front Right | — |
| 2009 | Nissan | 350Z | — | — | Front Left | — |
| 2008 | Nissan | 350Z | — | — | Front Right | — |
| 2008 | Nissan | 350Z | — | — | Front Left | — |
| 2007 | INFINITI | G35 | Coupe | — | Front Right | — |
| 2007 | INFINITI | G35 | Coupe | — | Front Left | — |
| 2007 | Nissan | 350Z | — | — | Front Right | — |
| 2007 | Nissan | 350Z | — | — | Front Left | — |
| 2006 | INFINITI | G35 | — | RWD | Front Right | — |
| 2006 | INFINITI | G35 | — | RWD | Front Left | — |
| 2006 | Nissan | 350Z | — | — | Front Right | — |
| 2006 | Nissan | 350Z | — | — | Front Left | — |
| 2005 | INFINITI | G35 | — | RWD | Front Right | — |
| 2005 | INFINITI | G35 | — | RWD | Front Left | — |
| 2005 | Nissan | 350Z | — | — | Front Right | — |
| 2005 | Nissan | 350Z | — | — | Front Left | — |
| 2004 | INFINITI | G35 | — | RWD | Front Right | From 08/2004 |
| 2004 | INFINITI | G35 | — | RWD | Front Left | From 08/2004 |
| 2004 | Nissan | 350Z | — | — | Front Right | From 08/2004 |
| 2004 | Nissan | 350Z | — | — | Front Left | From 08/2004 |
| No rows match your filter. | ||||||