/live/media/DE/DE_TC5520_Fro.jpg)
Delphi TC5520 Suspension Stabilizer Bar Link - Rear
| Brand | Delphi TC5520 |
|---|---|
| Position | Rear |
| Bearing Material | Polyoxymethilen (POM) |
| Bolts Included | No |
| Bushing Color | Gray |
| Bushing Inside Diameter | 0.709 |
| Bushing Inside Diameter | 18.0 |
| Bushing Material | Natural Rubber (NR) |
| Bushing Outside Diameter | 1.35 |
| Bushing Outside Diameter | 34.3 |
| Bushings Included | Yes |
| Distance Between Mounting Holes | 106.5 |
| Dust Boot Included | Yes |
| End 2 Type | Male |
| Grade Type | Performance |
| Greaseable | No |
| Height | 2.52 |
| Height | 64.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 5.748 |
| Length | 146.0 |
| Locking Nuts Included | Yes |
| Material | Ball Pin - Steel |
| Sleeve Inside Diameter | 0.4 |
| Sleeve Inside Diameter | 10.1 |
| Sleeve Length | 2.154 |
| Sleeve Length | 54.7 |
| Washers Included | No |
| Weight | 0.74 |
| Width | 2.165 |
| Width | 55.0 |
| Wrench Size | 0.197 |
| Wrench Size | 5.0 |
| Fits | Subaru · 25 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a steel ball pin and housing for dependable strength.
Includes bushings. Dust boot and locking nuts are included for a complete install.
Cross-references Beck/Arnley 101-6719, MOOG Chassis Products K750404 and 20470 AJ010 for the same application. See all 3.
Rear Stabilizer Bar Link for Subaru Fitment
Delphi TC5520 is a rear suspension stabilizer bar link built for OE-style replacement on select Subaru applications. It is engineered with Delphi’s aftermarket steering and suspension expertise, using dimensional and material analysis to support proper fit on the listed vehicles.
- Rear suspension stabilizer bar link for select Subaru models
- Fits 2011-2019 Subaru Outback, rear
- Fits 2009-2018 Subaru Forester, rear
- Fits 2016-2017 Subaru Crosstrek, rear
- Fits 2013-2015 Subaru XV Crosstrek, rear
- Fits 2010 Subaru Outback, rear, from 02/2009
- Steel ball pin and steel housing for durable construction
- Natural rubber bushing with gray finish
- Dust boot included; locking nuts included
- Performance-grade, standard replacement design
Built for OE-Style Suspension Service
The Delphi TC5520 stabilizer bar link is made for rear suspension service where precise linkage between the sway bar and suspension components matters. It measures 146.0 mm in length, uses a male end on end 2, and includes bushings, a dust boot, and locking nuts for the listed application. Bearing material is polyoxymethylene (POM), while the bushing material is natural rubber (NR), supporting consistent movement and fitment on Subaru Outback, Forester, Crosstrek, and XV Crosstrek rear suspension systems. This part cross-references Beck/Arnley 101-6719 and MOOG K750404 for the same application.
Common Problems This Part Can Address
- Rear suspension noise over bumps or uneven pavement
- Excessive sway bar link play from worn bushings or joints
- Clunking or rattling from the rear suspension area
- Loose or inconsistent rear handling response
- Wear-related replacement needs on Subaru rear stabilizer link assemblies
Installation Notes and Tips
Confirm rear position and vehicle coverage before installation. Verify the link length, mounting-hole spacing, and end style against the removed part to ensure correct replacement on the specific Subaru Outback, Forester, Crosstrek, or XV Crosstrek application. Inspect adjacent sway bar bushings and suspension hardware during service so the new link is not installed against worn components.
Quality Assurance
Delphi applies OE-focused testing and dimensional analysis to its aftermarket steering and suspension parts. This stabilizer bar link is evaluated for temperature extremes below -40 degrees C and above 120 degrees C, and it is exposed to 720 hours of salt spray testing to support corrosion resistance and long-term service performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2019 | Subaru | Outback | Rear | — |
| 2018 | Subaru | Forester | Rear | — |
| 2018 | Subaru | Outback | Rear | — |
| 2017 | Subaru | Crosstrek | Rear | — |
| 2017 | Subaru | Forester | Rear | — |
| 2017 | Subaru | Outback | Rear | — |
| 2016 | Subaru | Crosstrek | Rear | — |
| 2016 | Subaru | Forester | Rear | — |
| 2016 | Subaru | Outback | Rear | — |
| 2015 | Subaru | Forester | Rear | — |
| 2015 | Subaru | Outback | Rear | — |
| 2015 | Subaru | XV Crosstrek | Rear | — |
| 2014 | Subaru | Forester | Rear | — |
| 2014 | Subaru | Outback | Rear | — |
| 2014 | Subaru | XV Crosstrek | Rear | — |
| 2013 | Subaru | Forester | Rear | — |
| 2013 | Subaru | Outback | Rear | — |
| 2013 | Subaru | XV Crosstrek | Rear | — |
| 2012 | Subaru | Forester | Rear | — |
| 2012 | Subaru | Outback | Rear | — |
| 2011 | Subaru | Forester | Rear | — |
| 2011 | Subaru | Outback | Rear | — |
| 2010 | Subaru | Forester | Rear | — |
| 2010 | Subaru | Outback | Rear | From 02/2009 |
| 2009 | Subaru | Forester | Rear | — |
| No rows match your filter. | ||||