/live/media/DE/DE_TC5648_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5648 Suspension Ball Joint - Front Lower
| Brand | Delphi TC5648 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 4.016 |
| Item Grade | Standard Replacement |
| Length | 102 |
| Length | 416 |
| Material | Steel |
| Maximum Outside Diameter | 2.264 |
| Maximum Outside Diameter | 57.5 |
| Mount Plate Included | No |
| Mounting Bolts Included | No |
| Mounting Hardware Included | Yes |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Taper Per Foot | 0.125 |
| Stud Tapered End 1 Diameter | 0.906 |
| Stud Tapered End 1 Diameter | 23.0 |
| Stud Tapered End 2 Diameter | 0.807 |
| Stud Tapered End 2 Diameter | 20.5 |
| Stud Thread Diameter | 18.0 |
| Stud Thread Length | 0.945 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | Yes |
| Width | 57.5 |
| Fits | Lexus and Toyota · 20 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a dust boot and corrosion-tested for demanding conditions.
Press-in design. Includes mounting hardware, nuts, cotter pin, and washers.
Cross-references Beck/Arnley 102-6582, Dorman - OE Solutions 521-232 and Dorman - Premium BJ75045XL for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Lower Ball Joint for Lexus and Toyota
Delphi TC5648 is a front lower suspension ball joint built for the Lexus LX470 and Toyota Land Cruiser. It combines OE-focused dimensional and material analysis with a standard replacement design for direct service on the front suspension.
Key Features
- Fits 1998-2007 Lexus LX470, front lower
- Fits 1998-2007 Toyota Land Cruiser, front lower
- Steel construction with gray finish
- Press-in mounting type
- Ball joint assembly included
- Dust boot included with chloroprene rubber (CR) material
- Castle nut, cotter pin, nuts, washers, and mounting hardware included
- Non-greaseable, standard suspension grade design
- Threaded stud with tapered stud profile
Detailed Description
Delphi TC5648 front lower ball joint is engineered for OE-style fit and function in the suspension system of the Lexus LX470 and Toyota Land Cruiser. Delphi applies dimensional and material analysis to help ensure proper compatibility with the original suspension geometry, while the steel body, tapered stud, and press-in mounting design support a direct replacement service part for front lower applications. This part cross-references MOOG Chassis Products (e.g., K500133) for the same application.
Delphi tests steering and suspension components under extreme temperature and corrosion conditions, including sub-zero cold, high heat, and extended salt spray exposure. That validation approach supports consistent performance in demanding road conditions and helps maintain secure front-end suspension operation. Delphi TC5648 is a practical choice when replacing worn front lower ball joints on a 1998-2007 Lexus LX470 or 1998-2007 Toyota Land Cruiser.
What This Part Helps Address
- Front-end looseness or play from a worn lower ball joint
- Clunking or knocking noises from the front suspension
- Uneven tire wear related to suspension joint wear
- Steering wander or imprecise road feel
- Inspection failure caused by excessive ball joint movement
Installation Notes and Tips
Verify front lower position and press-in fitment before installation. Inspect the control arm and surrounding suspension components for wear, since a new ball joint performs best when related parts are in serviceable condition. Use the included castle nut, cotter pin, nuts, washers, and mounting hardware as specified for the application, and confirm stud taper and thread specifications match the original part.
Quality Assurance
Delphi uses OE-based engineering and validation methods for its steering and suspension portfolio. TC5648 is built with attention to dimensional accuracy, material compatibility, and corrosion resistance testing to support dependable service in front suspension applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Lexus | LX470 | Front Lower | — |
| 2007 | Toyota | Land Cruiser | Front Lower | — |
| 2006 | Lexus | LX470 | Front Lower | — |
| 2006 | Toyota | Land Cruiser | Front Lower | — |
| 2005 | Lexus | LX470 | Front Lower | — |
| 2005 | Toyota | Land Cruiser | Front Lower | — |
| 2004 | Lexus | LX470 | Front Lower | — |
| 2004 | Toyota | Land Cruiser | Front Lower | — |
| 2003 | Lexus | LX470 | Front Lower | — |
| 2003 | Toyota | Land Cruiser | Front Lower | — |
| 2002 | Lexus | LX470 | Front Lower | — |
| 2002 | Toyota | Land Cruiser | Front Lower | — |
| 2001 | Lexus | LX470 | Front Lower | — |
| 2001 | Toyota | Land Cruiser | Front Lower | — |
| 2000 | Lexus | LX470 | Front Lower | — |
| 2000 | Toyota | Land Cruiser | Front Lower | — |
| 1999 | Lexus | LX470 | Front Lower | — |
| 1999 | Toyota | Land Cruiser | Front Lower | — |
| 1998 | Lexus | LX470 | Front Lower | — |
| 1998 | Toyota | Land Cruiser | Front Lower | — |
| No rows match your filter. | ||||