/live/media/DE/DE_TC5695_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5695 Suspension Ball Joint - Front Lower
| Brand | Delphi TC5695 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Silver |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 5.118 |
| Item Grade | Standard Replacement |
| Length | 130 |
| Material | Steel |
| Maximum Outside Diameter | 2.5 |
| Maximum Outside Diameter | 63.5 |
| Mount Plate Included | No |
| Mounting Bolts Included | No |
| Mounting Hardware Included | Yes |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Taper Per Foot | 0.167 |
| Stud Tapered End 1 Diameter | 0.846 |
| Stud Tapered End 1 Diameter | 21.5 |
| Stud Tapered End 2 Diameter | 0.709 |
| Stud Tapered End 2 Diameter | 18.0 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 1.181 |
| Stud Thread Pitch | 2.0 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | Yes |
| Width | 63.5 |
| Fits | Ford · 5 vehicles |
Standard replacement. OE-style fit and compatibility for straightforward service.
Steel construction. Built with a durable dust boot and press-in mounting design.
Hardware included. Comes with mounting hardware, washers, and nuts for installation.
Cross-references MOOG Chassis Products K500193, AL3Z 3050-A and BL3Z 3050-B for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC5695 Front Lower Ball Joint
Delphi TC5695 is a front lower suspension ball joint built for the 2010-2014 Ford F-150. It combines a steel housing, press-in mounting design, and a sealed dust boot to support precise steering and suspension movement in everyday driving.
Engineered from Delphi OE-focused dimensional and material analysis, this replacement ball joint is built to match the fit and function expected in the Ford F-150 front suspension. The Delphi TC5695 is a standard replacement choice for drivers servicing worn front lower joints on 2010-2014 Ford F-150 trucks.
Key Features
- Fits 2010-2014 Ford F-150, front lower
- Steel construction with silver finish
- Press-in mounting type for front suspension service
- Dust boot included with chloroprene rubber (CR) material
- Ball joint assembly included
- Mounting hardware, washers, and nuts included
- Standard replacement, non-adjustable, non-greaseable design
- Threaded tapered stud with 16.0 mm stud thread diameter
Detailed Description
Delphi TC5695 is a front lower suspension ball joint for the Ford F-150, designed for direct replacement in 2010-2014 applications. It uses a press-in mounting style and a tapered threaded stud to support secure suspension connection at the lower control arm. The steel body and sealed dust boot help protect the joint from road contamination while maintaining consistent articulation.
Delphi applies OE-based testing and dimensional analysis to its steering and suspension parts, including exposure to extreme temperatures and salt spray testing. This helps ensure the aftermarket part aligns closely with OE fitment expectations for the Ford F-150 front lower position. Part number TC5695 also cross-references MOOG Chassis Products K500193 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Loose or wandering steering feel
- Uneven tire wear from worn suspension geometry
- Excessive play in the front lower control arm area
- Inspection failure due to worn ball joint movement
Installation Notes and Tips
Fits 2010-2014 Ford F-150, front lower. Verify press-in fitment, stud taper, and thread specifications before installation. Because this is a non-greaseable design, routine service is limited to inspection and replacement when wear is present. Always confirm alignment after replacing a front lower ball joint on the Ford F-150.
Quality Assurance
Delphi uses OE-oriented engineering, dimensional checks, and material analysis to support consistent aftermarket fitment. The TC5695 is tested for temperature extremes and corrosion resistance to help meet the demands of suspension service in real-world driving conditions.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2014 | Ford | F-150 | SVT Raptor | Front Lower | — |
| 2013 | Ford | F-150 | SVT Raptor | Front Lower | — |
| 2012 | Ford | F-150 | SVT Raptor | Front Lower | — |
| 2011 | Ford | F-150 | SVT Raptor | Front Lower | — |
| 2010 | Ford | F-150 | SVT Raptor | Front Lower | — |
| No rows match your filter. | |||||