/live/media/DE/DE_TC5830_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC5830 Suspension Ball Joint - Front Lower
| Brand | Delphi TC5830 |
|---|---|
| Position | Front Lower |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Gray |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Height | 1.811 |
| Height | 46.0 |
| Item Grade | Standard Replacement |
| Length | 84 |
| Material | Steel |
| Maximum Outside Diameter | 1.57 |
| Maximum Outside Diameter | 39.8 |
| Mount Plate Included | No |
| Mounting Bolts Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.591 |
| Stud Tapered End 1 Diameter | 15.0 |
| Stud Tapered End 2 Diameter | 0.667 |
| Stud Tapered End 2 Diameter | 16.95 |
| Stud Thread Diameter | 12.0 |
| Stud Thread Length | 0.866 |
| Stud Thread Length | 22.0 |
| Stud Thread Pitch | 1.25 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | No |
| Width | 46.0 |
| Fits | Volvo · 8 vehicles |
Standard replacement. OE-style compatibility helps match the original part more closely.
Steel construction. Built with a dust boot and threaded stud for dependable suspension service.
Press-in design. Includes mounting hardware and nuts for a more complete install.
Cross-references 308870252 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC5830 Front Lower Ball Joint
The Delphi TC5830 is a front lower suspension ball joint built for OE-style replacement on select Volvo applications. It is engineered with a steel body, press-in mounting, and a sealed dust boot to support precise suspension movement in demanding road conditions.
Compatible with 2001-2004 Volvo S40 and 2001-2004 Volvo V40, front lower. Delphi applies OE-level dimensional and material analysis to help maintain proper fit and suspension geometry on these vehicles.
Key Features
- Part number: TC5830
- Front lower suspension ball joint
- Steel construction with gray finish
- Press-in mounting type
- Dust boot included with chloroprene rubber material
- Ball joint assembly included
- Mounting hardware included
- Standard replacement grade
- Threaded stud with tapered stud design
Detailed Description
Delphi TC5830 is a premium suspension ball joint designed for the front lower position on 2001-2004 Volvo S40 and 2001-2004 Volvo V40 models. It features a press-in design, a threaded stud, and a tapered stud profile for proper suspension interface. The sealed dust boot helps protect the joint from contamination, while the steel construction supports long-term service in everyday driving conditions. Delphi validates its OE-focused aftermarket steering and suspension parts through extreme temperature and salt-spray testing to help maintain consistent performance and fit.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part May Address
- Front suspension looseness or play
- Clunking or knocking from the lower control arm area
- Uneven tire wear related to worn suspension joints
- Steering wander or reduced front-end stability
- Excess movement at the front lower suspension pivot point
Installation Notes and Tips
Verify the front lower position and confirm vehicle fitment before installation. Because this is a press-in ball joint, proper removal and installation tools are recommended to avoid damage to the control arm or surrounding components. Inspect adjacent suspension parts, alignment angles, and fasteners during service, and perform a wheel alignment after replacement.
Quality Assurance
Delphi uses OE-based engineering, dimensional analysis, and material validation to support fit and performance consistency. Its suspension components are tested across extreme temperature ranges and extended salt-spray exposure to evaluate durability in real-world conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Volvo | S40 | Front Lower | — |
| 2004 | Volvo | V40 | Front Lower | — |
| 2003 | Volvo | S40 | Front Lower | — |
| 2003 | Volvo | V40 | Front Lower | — |
| 2002 | Volvo | S40 | Front Lower | — |
| 2002 | Volvo | V40 | Front Lower | — |
| 2001 | Volvo | S40 | Front Lower | — |
| 2001 | Volvo | V40 | Front Lower | — |
| No rows match your filter. | ||||