/live/media/DE/DE_TC6438_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC6438 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC6438 |
|---|---|
| Position | Front |
| Bearing Material | Polyoxymethilen (POM) |
| Bolt Length | 4.862 |
| Bolt Length | 123.5 |
| Bolt Thread Diameter | 0.39 |
| Bolt Thread Diameter | 0.55 |
| Bolt Thread Diameter | 10.0 |
| Bolt Thread Diameter | 14.0 |
| Bolts Included | No |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Greaseable | No |
| Height | 6.024 |
| Height | 153.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 4.862 |
| Length | 123.5 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 1.21 |
| Width | 1.654 |
| Width | 42.0 |
| Fits | Dodge · 1 vehicle |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Steel construction. Built with a steel housing and ball joints for dependable suspension control.
Dust boot included. Helps protect the joint from contamination and wear.
Cross-references MOOG Chassis Products K750757 and 5139 522AA for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Stabilizer Bar Link for Ram 2500
Delphi TC6438 is a front suspension stabilizer bar link built with steel construction, ball joint ends, and a dust boot for the 2005 Dodge Ram 2500 with a front disconnecting stabilizer bar. It is a standard replacement part that follows OE-style dimensional and material analysis for accurate fitment.
Key Features
- Fits 2005 Dodge Ram 2500, front, for vehicles with front disconnecting stabilizer bar [SHG]
- Steel housing and steel construction for suspension service
- Ball joint ends on both sides for stabilizer bar connection
- Dust boot included; bushings, washers, bolts, and grease fittings are not included
- Standard replacement design for front suspension repair
- Delphi TC6438 cross-references MOOG Chassis Products K750757 for the same application
Detailed Description
Delphi TC6438 stabilizer bar link is engineered for front suspension service on the 2005 Dodge Ram 2500. It uses steel housing material, polyoxymethylene (POM) bearing material, and ball joint ends to connect the stabilizer bar at the front position. Delphi applies OE-focused dimensional and material analysis to help maintain proper compatibility with the original suspension layout, and the part is tested across extreme temperature and salt-spray exposure conditions to verify durability in demanding road environments. Delphi TC6438 also cross-references part number 5139 522AA.
Common Repair Uses
- Restores a worn or loose front stabilizer bar connection
- Addresses front-end clunking or rattling over bumps
- Helps correct sway bar link play that can affect handling response
- Replaces a damaged link on a 2005 Dodge Ram 2500 with front disconnecting stabilizer bar [SHG]
Installation Notes and Tips
Install this link at the front position only and verify the vehicle has the front disconnecting stabilizer bar configuration before ordering. Inspect adjacent sway bar bushings, control arm hardware, and mounting points for wear before completing the repair. Confirm thread size and overall dimensions against the original part during service. Delphi TC6438 is a direct-fit style replacement for the listed application.
Quality Assurance
Delphi uses OE-based engineering, dimensional analysis, and material validation to support consistent aftermarket fit and function. This part is exposed to temperature extremes below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray testing, to evaluate resistance in harsh operating conditions.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2005 | Dodge | Ram 2500 | 4WD | Front | For Vehicle With Front Disconnecting Stabilizer Bar [SHG] |
| No rows match your filter. | |||||