Delphi TC6992 Suspension Stabilizer Bar Link - Front Right

Front Right Stabilizer Bar Link for BMW X3/X4

Delphi TC6992 is a front right suspension stabilizer bar link built for OE-style replacement on select BMW applications. It is listed for 2018-2025 BMW X3 and 2019-2025 BMW X4, making it a direct-fit option for drivers servicing front-end suspension noise or handling concerns.

Key Features

• Part number: TC6992
• Front right suspension stabilizer bar link
• Ball joint ends on both sides
• Dust boot included
• Standard replacement grade
• Housing material: plastic
• Locking nuts included
• Greaseable: No
• Length: 14.370 in. / 365.00 mm
• Distance between mounting holes: 317.00 mm

Product Details

Delphi applies OE engineering and dimensional analysis to its aftermarket steering and suspension portfolio, and TC6992 follows that approach with a front right stabilizer link designed for precise fitment. The ball joint construction and included dust boot support consistent articulation at the sway bar connection point, while the standard replacement design matches the needs of routine suspension service on BMW X3 and BMW X4 models. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Common Problems This Part Can Address

• Front-end clunking or rattling from a worn stabilizer link
• Excess play at the sway bar connection
• Uneven steering response caused by suspension wear
• Noisy suspension movement over bumps and rough pavement
• Inspection failure from damaged ball joints or boots

Installation Notes and Tips

Fits 2018-2025 BMW X3, front right. Fits 2019-2025 BMW X4, front right. Confirm the vehicle’s front right position before installation and compare the original link length, mounting-hole spacing, and end style to the replacement part. The included locking nuts support installation, and the 5 mm wrench size should be verified against the service procedure for the vehicle.

Quality Assurance

Delphi tests its OE-style components for temperature extremes below -40 degrees C and above 120 degrees C, and subjects parts to 720 hours of salt spray exposure. TC6992 is backed by Delphi’s OE-focused dimensional and material analysis for aftermarket fit and performance consistency.