Delphi TC7054 Suspension Control Arm and Ball Joint Assembly - Front Left Lower Rearward

Brand Delphi TC7054
Position Front Left Lower Rearward
Thread Direction Clockwise (right)
Bushing Color Black
Finish Uncoated
Pre-Greased Yes
Bushings Included Yes
Dust Boot Included Yes
Ball Joint Mounting Type Press in
Ball Joint Stud Type Threaded
Ball Joint Included Yes
Control Arm Construction Casting/forged
Control Arm Material Aluminum
Mounting Hardware Included Yes
Grade Type Premium
Boot Material Chloroprene rubber (cr)
Adjustable No
Locking Nut Included Yes
Greaseable No
Control Arm Color Gray
Ball Joint Stud Length 2.992
Ball Joint Stud Length 76.00
Control Arm Maximum Length 17.598
Control Arm Maximum Length 447.00
Boot Color Black
Steering Type Power
Bearing Material Plastic
Bushing Material Rubber
Dust Boot Material Chloroprene rubber (cr)
Bushing Inside Diameter 0.480
Bushing Inside Diameter 12.20
Bushing Length 3.701
Fits Audi and Porsche · 50 vehicles

OE expertise. Delphi applies original-equipment know-how to its aftermarket steering parts.

Extreme-condition tested. Built to handle subzero cold, high heat, and 720 hours of salt spray.

Complete front-left assembly. Includes the ball joint, bushings, dust boot, and mounting hardware.

Cross-references Mevotech Supreme CMS701168, MOOG Chassis Products RK623727 and 4M0 407 693 C for the same application. See all 9.

$152.02Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $152.02
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

OE-Style Front Left Lower Rearward Control Arm

Delphi TC7054 is a suspension control arm and ball joint assembly for the front left lower rearward position. It is built with an aluminum control arm, a press-in ball joint, and included bushings and dust boot for a complete replacement on select Audi and Porsche applications.

Fits 2019-2023 Audi A8 Quattro, front left lower rearward; fits 2019-2023 Audi e-tron Quattro, front left lower rearward; fits 2022-2023 Audi e-tron S, front left lower rearward; fits 2022-2023 Audi e-tron S Sportback, front left lower rearward; fits 2020-2023 Audi e-tron Sportback, front left lower rearward; fits 2017-2023 Audi Q7, front left lower rearward; fits 2019-2023 Audi Q8, front left lower rearward; fits 2021-2023 Audi RS Q8, front left lower rearward; fits 2020-2023 Audi S8, front left lower rearward; fits 2020-2023 Audi SQ7, front left lower rearward; fits 2020-2023 Audi SQ8, front left lower rearward; fits 2019-2023 Porsche Cayenne, front left lower rearward.

Key Features

  • Part number TC7054
  • Front left lower rearward suspension control arm and ball joint assembly
  • Aluminum control arm construction with casting/forged design
  • Pre-greased assembly with bushings, dust boot, and locking nut included
  • Press-in ball joint with threaded stud
  • Black rubber bushings and chloroprene rubber dust boot
  • Uncoated gray finish
  • Non-adjustable, non-greaseable design
  • Power steering application

Detailed Description

Delphi TC7054 is engineered for the front left lower rearward suspension position on select Audi Q7, Q8, SQ7, SQ8, RS Q8, A8 Quattro, e-tron models, and Porsche Cayenne applications. Delphi applies OE-focused dimensional and material analysis to help match aftermarket fit and function to the original part, while the assembly is tested across extreme temperature ranges and salt-spray exposure for durability. This part cross-references MOOG Chassis Products RK623727 for the same application.

What This Part Helps Address

  • Clunking or knocking from the front suspension
  • Excessive play in the lower control arm assembly
  • Uneven tire wear caused by worn suspension joints or bushings
  • Steering wander or reduced front-end stability
  • Visible cracking, separation, or wear in the original control arm bushings

Installation Notes

Verify the vehicle position before installation: front left lower rearward. This assembly uses a press-in ball joint and threaded stud, so proper suspension service tools and torque procedures are required. Confirm fitment by year, make, model, and position before ordering. Part number TC7054 is also listed under OE and aftermarket references for select applications.

Quality Assurance

Delphi subjects steering and suspension components to temperature testing below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray exposure. The brand also uses dimensional and material analysis to support OE-level compatibility between original and replacement parts.

This part fits 50 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelLitersCylindersPositionNotes
2023AudiA8 Quattro3.0LV6Front Left Lower Rearward
2023Audie-tron QuattroFront Left Lower Rearward
2023Audie-tron SFront Left Lower Rearward
2023Audie-tron S SportbackFront Left Lower Rearward
2023Audie-tron SportbackFront Left Lower Rearward
2023AudiQ7Front Left Lower Rearward
2023AudiQ8Front Left Lower Rearward
2023AudiRS Q8Front Left Lower Rearward
2023AudiS8Front Left Lower Rearward
2023AudiSQ7Front Left Lower Rearward
2023AudiSQ8Front Left Lower Rearward
2023PorscheCayenne4.0LV8Front Left Lower Rearward
2022AudiA8 QuattroFront Left Lower Rearward
2022Audie-tron QuattroFront Left Lower Rearward
2022Audie-tron SFront Left Lower Rearward
2022Audie-tron S SportbackFront Left Lower Rearward
2022Audie-tron SportbackFront Left Lower Rearward
2022AudiQ7Front Left Lower Rearward
2022AudiQ8Front Left Lower Rearward
2022AudiRS Q8Front Left Lower Rearward
2022AudiS8Front Left Lower Rearward
2022AudiSQ7Front Left Lower Rearward
2022AudiSQ8Front Left Lower Rearward
2022PorscheCayenne4.0LV8Front Left Lower Rearward
2021AudiA8 QuattroFront Left Lower Rearward
2021Audie-tron QuattroFront Left Lower Rearward
2021Audie-tron SportbackFront Left Lower Rearward
2021AudiQ73.0LV6Front Left Lower Rearward
2021AudiQ8Front Left Lower Rearward
2021AudiRS Q8Front Left Lower Rearward
2021AudiS8Front Left Lower Rearward
2021AudiSQ7Front Left Lower Rearward
2021AudiSQ8Front Left Lower Rearward
2021PorscheCayenne4.0LV8Front Left Lower Rearward
2020AudiA8 QuattroFront Left Lower Rearward
2020Audie-tron QuattroFront Left Lower Rearward
2020Audie-tron SportbackFront Left Lower Rearward
2020AudiQ7Front Left Lower Rearward
2020AudiQ8Front Left Lower Rearward
2020AudiS8Front Left Lower Rearward
2020AudiSQ7Front Left Lower Rearward
2020AudiSQ8Front Left Lower Rearward
2020PorscheCayenne4.0LV8Front Left Lower Rearward
2019AudiA8 QuattroFront Left Lower Rearward
2019Audie-tron QuattroFront Left Lower Rearward
2019AudiQ73.0LV6Front Left Lower Rearward
2019AudiQ8Front Left Lower Rearward
2019PorscheCayenne4.0LV8Front Left Lower Rearward
2018AudiQ73.0LV6Front Left Lower Rearward
2017AudiQ73.0LV6Front Left Lower Rearward
Directly replaces or cross-references 9 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Mevotech Supreme — CMS701168MOOG Chassis Products — RK6237274M0 407 693 C4M0 407 693 D4M0 407 693 E4M0407693F958 407 693 00526589PAB 407 693