/live/media/DE/DE_TC8334_FRO.JPG)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC8334 Suspension Stabilizer Bar Link - Front Left
| Brand | Delphi TC8334 |
|---|---|
| Position | Front Left |
| Length | 15.070 |
| Length | 382.90 |
| End 1 Type | Ball joint |
| End 2 Type | Ball joint |
| Bushings Included | No |
| Dust Boot Included | Yes |
| Width | 1.59 |
| Width | 40.5 |
| Washers Included | No |
| Height | 2.550 |
| Height | 64.70 |
| Grade Type | Standard replacement |
| Bolts Included | No |
| Housing Material | Steel |
| Boot Material | Rubber |
| Greaseable | No |
| Weight | 1.65 |
| Bearing Material | Polyoxymethylene (pom) |
| Wrench Size | 5mm |
| Bolt Length | 0.940 |
| Bolt Length | 23.95 |
| Distance Between Mounting Holes | 342.00 |
| Locking Nuts Included | Yes |
| Hardware Included | Yes |
| Fits | Honda · 4 vehicles |
OE expertise. Delphi applies OE engineering to its aftermarket steering parts.
Standard replacement. A direct-fit stabilizer bar link for straightforward service.
Steel housing. Built with a rubber boot and ball joints at both ends.
Cross-references MOOG Chassis Products K750921 and 51325-THR-A01 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Left Stabilizer Bar Link for Honda Odyssey
The Delphi TC8334 is a front left suspension stabilizer bar link built for OE-style replacement on select Honda Odyssey models. It uses ball joint ends, a steel housing, and a rubber dust boot to support stable sway bar connection and consistent front suspension response.
Fits 2018-2021 Honda Odyssey, front left.
Key Features
- Delphi TC8334 suspension stabilizer bar link for the front left position
- Ball joint ends on both sides for sway bar linkage movement
- Steel housing with rubber boot material
- Standard replacement grade for OE-style service
- Dust boot included; locking nuts and hardware included
- Non-greaseable design with POM bearing material
Detailed Description
Delphi applies OE-focused dimensional and material analysis to this stabilizer bar link to help match factory fit and function. The TC8334 measures 15.070 in. long, 1.59 in. wide, and 2.550 in. high, with a 342.00 mm distance between mounting holes and a 5 mm wrench size. It is built with ball joint ends at both connections, a steel housing, and a rubber boot to support front suspension articulation on the Honda Odyssey. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For drivers searching for a front left sway bar link for 2018-2021 Honda Odyssey, Delphi TC8334 provides a direct-fit replacement option. It is listed for the front left position and matches the OE-style service needs of this application.
Common Issues This Part Can Address
- Front-end clunking or rattling over bumps
- Excessive play in the stabilizer bar connection
- Uneven sway bar response during cornering
- Worn or damaged ball joint link ends
- Noise caused by a torn or missing dust boot
Installation Notes and Tips
Verify front left fitment before installation on your Honda Odyssey. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before replacing the link. Torque fasteners to the vehicle manufacturer’s specifications and confirm the link is seated correctly after installation.
Quality Assurance
Delphi subjects steering and suspension components to extreme temperature and salt-spray testing to evaluate durability in demanding conditions. The TC8334 is engineered using OE-oriented analysis to support proper fit and consistent replacement performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2021 | Honda | Odyssey | Front Left | — |
| 2020 | Honda | Odyssey | Front Left | — |
| 2019 | Honda | Odyssey | Front Left | — |
| 2018 | Honda | Odyssey | Front Left | — |
| No rows match your filter. | ||||