/live/media/DE/DE_TC836_Ang.jpg)
Delphi TC836 Suspension Ball Joint - Front Lower
| Brand | Delphi TC836 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Gray |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.335 |
| Height | 84.7 |
| Item Grade | Standard Replacement |
| Length | 44 |
| Material | Steel |
| Maximum Outside Diameter | 1.732 |
| Maximum Outside Diameter | 44.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.567 |
| Stud Tapered End 1 Diameter | 14.4 |
| Stud Tapered End 2 Diameter | 0.63 |
| Stud Tapered End 2 Diameter | 16.0 |
| Stud Thread Diameter | 0.472 |
| Stud Thread Diameter | 12.0 |
| Stud Thread Length | 0.937 |
| Stud Thread Length | 23.8 |
| Stud Thread Pitch | 1.25 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 44.0 |
| Fits | Acura and Honda · 31 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Pressed mounting. Includes hardware for a straightforward installation.
Steel construction. With a chloroprene rubber dust boot for added protection.
Cross-references Beck/Arnley 101-3789, MAS Industries B9802 and Mevotech Original Grade GK9802 for the same application. See all 18.
Delphi TC836 Front Lower Ball Joint
Delphi TC836 is a standard replacement suspension ball joint for the front lower position on select Acura and Honda applications. Built with a steel body, pressed mounting type, and a dust boot, it is engineered for OE-style fitment and consistent steering and suspension movement.
Key Features
- Part number: TC836
- Front lower suspension ball joint
- Steel construction with gray finish
- Pressed mounting type
- Ball joint assembly with dust boot included
- Standard replacement, non-adjustable design
- Threaded stud with tapered end for secure seating
- Mounting hardware and nuts included
- Grease fitting not included; sealed, non-greaseable design
Detailed Description
Delphi TC836 is built for OE-style suspension service where precise fit and dependable articulation matter. Delphi applies dimensional and material analysis to support compatibility between original equipment and aftermarket replacement parts, and this ball joint is tested across extreme temperature and corrosion conditions to verify durability. The design uses a steel housing, chloroprene rubber dust boot, and a pressed installation style for front lower suspension locations.
This part cross-references MOOG Chassis Products K9802 for the same application. It is a direct-fit option for drivers servicing Acura Integra, Honda CR-V, Honda EL, Honda Civic, and Honda Civic del Sol front lower suspension wear. If you are replacing a worn Delphi TC836 or sourcing a front lower ball joint for these vehicles, this part number is a relevant OE-style match.
Vehicle Fitment
- Fits 1994-2001 Acura Integra, front lower
- Fits 1997-2001 Honda CR-V, front lower
- Fits 1997-2000 Acura EL, front lower
- Fits 1992-2000 Honda Civic, front lower
- Fits 1993-1997 Honda Civic del Sol, front lower
Common Repair Uses
- Restoring front-end steering response after ball joint wear
- Correcting looseness or play in the lower suspension
- Addressing clunking or popping noises from the front suspension
- Replacing a damaged dust boot or worn joint housing
- Servicing OE-style suspension geometry on Acura and Honda models
Installation Notes and Quality Assurance
Delphi TC836 uses a pressed-in mounting design, so proper removal and installation tools are required. Verify the stud taper, thread size, and front lower position before installation, and inspect the surrounding control arm and hardware for wear. The sealed design does not use a grease fitting, and the included dust boot helps protect the joint from contamination.
Delphi’s OE-focused testing includes exposure to sub-zero and high-temperature conditions as well as extended salt-spray corrosion testing. That validation supports consistent performance for front lower suspension service on Acura Integra, Honda CR-V, Honda EL, Honda Civic, and Honda Civic del Sol applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Acura | Integra | Front Lower | — |
| 2001 | Honda | CR-V | Front Lower | — |
| 2000 | Acura | EL | Front Lower | — |
| 2000 | Acura | Integra | Front Lower | — |
| 2000 | Honda | Civic | Front Lower | — |
| 2000 | Honda | CR-V | Front Lower | — |
| 1999 | Acura | EL | Front Lower | — |
| 1999 | Acura | Integra | Front Lower | — |
| 1999 | Honda | Civic | Front Lower | — |
| 1999 | Honda | CR-V | Front Lower | — |
| 1998 | Acura | EL | Front Lower | — |
| 1998 | Acura | Integra | Front Lower | — |
| 1998 | Honda | Civic | Front Lower | — |
| 1998 | Honda | CR-V | Front Lower | — |
| 1997 | Acura | EL | Front Lower | — |
| 1997 | Acura | Integra | Front Lower | — |
| 1997 | Honda | Civic | Front Lower | — |
| 1997 | Honda | Civic del Sol | Front Lower | — |
| 1997 | Honda | CR-V | Front Lower | — |
| 1996 | Acura | Integra | Front Lower | — |
| 1996 | Honda | Civic | Front Lower | — |
| 1996 | Honda | Civic del Sol | Front Lower | — |
| 1995 | Acura | Integra | Front Lower | — |
| 1995 | Honda | Civic | Front Lower | — |
| 1995 | Honda | Civic del Sol | Front Lower | — |
| 1994 | Acura | Integra | Front Lower | — |
| 1994 | Honda | Civic | Front Lower | — |
| 1994 | Honda | Civic del Sol | Front Lower | — |
| 1993 | Honda | Civic | Front Lower | — |
| 1993 | Honda | Civic del Sol | Front Lower | — |
| 1992 | Honda | Civic | Front Lower | — |
| No rows match your filter. | ||||