/live/media/DE/DE_TC8510_FRO.JPG)
OE Quality
60-Day Returns
/live/media/DE/DE_TC8510_FRO.JPG)
/live/media/DE/DE_TC8510_ANG.JPG)
/live/media/DE/DE_TC8510_TOP.JPG)
/live/media/DE/DE_TC8510_RIG.JPG)
Delphi TC8510 Suspension Stabilizer Bar Link - Front Right
Delphi TC8510 Front Right Stabilizer Link
Delphi TC8510 is a front right suspension stabilizer bar link built for OE-style replacement on select Tesla models. It uses ball joint ends, a steel housing, and a rubber dust boot to support consistent steering and suspension response.
- Part number: TC8510
- Front right suspension stabilizer bar link
- Rod type: suspension rod
- End 1 type: ball joint
- End 2 type: ball joint
- Steel housing with rubber boot
- Dust boot included
- Standard replacement grade
- Bar diameter: 12.00 mm
- Length: 280.00 mm
- Wrench size: T40
- Locking nuts included
OE-Style Construction For Tesla Suspension
Delphi applies OE engineering knowledge to its aftermarket steering and suspension portfolio, and the TC8510 follows that approach with dimensional and material analysis for proper part matching. It is built to handle demanding temperature extremes and salt-spray exposure testing, helping support long-term durability in real-world driving conditions. This front right stabilizer link is a direct replacement choice for Tesla 3 and Tesla Y applications that require the specified OE-style geometry.
This part cross-references MOOG Chassis Products K750959 for the same application.
Vehicle Fitment
- Fits 2017-2023 Tesla 3, front right.
- Fits 2020-2023 Tesla Y, front right.
Common Symptoms This Part May Address
- Front-end clunking or rattling over bumps
- Loose or imprecise steering feel
- Excess sway bar movement at the front right corner
- Worn ball joint articulation in the stabilizer link
- Noise caused by a damaged dust boot or worn link joints
Installation Notes
Confirm front right placement before installation and match the link length, bar diameter, and end style to the original part. Use the T40 wrench size specified for service, and inspect adjacent sway bar and suspension components for wear while the vehicle is apart. Always verify fitment against the vehicle’s original equipment configuration for Tesla 3 and Tesla Y models.
Quality Assurance
Delphi subjects this stabilizer bar link to temperature and corrosion testing, along with dimensional and material checks, to support OE-level fit and function in the aftermarket.
| Brand | Delphi |
| Part Number | TC8510 |
| 10829 | No |
| Rod Type | Suspension rod |
| Reinforced | No |
| Length | 11.024 |
| Length | 280.00 |
| End 1 Type | Ball joint |
| End 2 Type | Ball joint |
| Dust Boot Included | Yes |
| Washers Included | No |
| Height | 2.268 |
| Height | 57.60 |
| Grade Type | Standard replacement |
| Housing Material | Steel |
| Boot Material | Rubber |
| Greaseable | No |
| Bar Diameter | 0.472 |
| Bar Diameter | 12.00 |
| Weight | 1.576 |
| Wrench Size | T40 |
| Locking Nuts Included | Yes |
| Hardware Included | Yes |
| Position(s) | Front right |
This part fits 11 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2023 | Tesla | 3 | Front Right | |
| 2023 | Tesla | Y | Front Right | |
| 2022 | Tesla | 3 | Front Right | |
| 2022 | Tesla | Y | Front Right | |
| 2021 | Tesla | 3 | Front Right | |
| 2021 | Tesla | Y | Front Right | |
| 2020 | Tesla | 3 | Front Right | |
| 2020 | Tesla | Y | Front Right | |
| 2019 | Tesla | 3 | Front Right | |
| 2018 | Tesla | 3 | Front Right | |
| 2017 | Tesla | 3 | Front Right |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.