/live/media/DE/DE_TD1456W_ANG.JPG)
Delphi TD1456W Suspension Knuckle Bushing - Rear
| Brand | Delphi TD1456W |
|---|---|
| Position | Rear |
| Material | Steel |
| Wall Thickness | 0.240 |
| Wall Thickness | 6.10 |
| Length | 2.440 |
| Length | 62.00 |
| Color | Gray |
| Inside Diameter | 0.550 |
| Inside Diameter | 14.20 |
| Washer Included | Yes |
| Outside Diameter | 1.850 |
| Outside Diameter | 47.20 |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Grade Type | Standard replacement |
| Attachment Method | Press in |
| Bushing Quantity | 1 |
| Fits | BMW · 11 vehicles |
OE expertise built in. Delphi applies original-equipment know-how to its aftermarket steering and suspension parts.
Extreme-condition tested. Withstands temperatures below -40°C and above 120°C, plus 720 hours of salt spray.
Specific press-in fit. Made for a precise rear suspension knuckle bushing replacement.
Cross-references 33 32 6 790 493 for the same application. See all 1.
Delphi TD1456W Rear Suspension Knuckle Bushing
Delphi TD1456W is a rear suspension knuckle bushing built as a standard replacement for select BMW applications. It uses a press-in design with a steel body, gray finish, and included washer to support a precise OE-style service repair on the rear suspension.
Key Features
- Part number TD1456W for easy identification
- Steel construction with gray finish
- Press-in attachment method
- Specific fit for the listed BMW applications
- Washer included
- Standard replacement grade
- Rear position application
- Dimensions: 62.00 mm length, 47.20 mm outside diameter, 14.20 mm inside diameter, 6.10 mm wall thickness
Product Details
Delphi applies OE-focused engineering to its aftermarket steering and suspension portfolio, using dimensional and material analysis to help maintain close compatibility with the original part. TD1456W is a rear suspension knuckle bushing for BMW X3 and BMW X4 models, built for a specific fit and press-in installation. The steel construction and included washer support a direct replacement service on the rear suspension knuckle assembly. This part cross-references BMW 33 32 6 790 493 for the same application.
Vehicle Fitment
- Fits 2015-2018 BMW X4, rear
- Fits 2011-2017 BMW X3, rear
Common Repair Uses
- Rear suspension noise from worn knuckle bushings
- Excessive play or looseness in the rear suspension
- Uneven rear tire wear related to suspension movement
- Restoring rear suspension alignment stability
- Replacing a damaged or deteriorated press-in bushing
Installation Notes
TD1456W is a press-in bushing, so proper removal and installation tools are recommended for service. Confirm rear position, dimensions, and vehicle application before installation on BMW X3 or BMW X4 models. Inspect the surrounding suspension components and replace any worn hardware or related parts as needed during the repair.
Quality Assurance
Delphi subjects its OE-focused parts to temperature extremes below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray exposure. These validation steps help verify durability and dimensional consistency for aftermarket suspension service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2018 | BMW | X4 | Rear | — |
| 2017 | BMW | X3 | Rear | — |
| 2017 | BMW | X4 | Rear | — |
| 2016 | BMW | X3 | Rear | — |
| 2016 | BMW | X4 | Rear | — |
| 2015 | BMW | X3 | Rear | — |
| 2015 | BMW | X4 | Rear | — |
| 2014 | BMW | X3 | Rear | — |
| 2013 | BMW | X3 | Rear | — |
| 2012 | BMW | X3 | Rear | — |
| 2011 | BMW | X3 | Rear | — |
| No rows match your filter. | ||||