/live/media/DE/DE_TD1792W_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TD1792W Suspension Control Arm Bushing - Rear Outer or Rear Upper Outer
| Brand | Delphi TD1792W |
|---|---|
| Position | Rear Upper Outer |
| Inside Diameter | 12.2 |
| Item Grade | Standard Replacement |
| Length | 49.3 |
| Outside Diameter | 40.0 |
| Position(s) | Rear Outer, Rear Upper Outer. For the position specific to your vehicle, refer to the Application tab. |
| Fits | Mazda · 22 vehicles |
Standard replacement. OE expertise applied to an aftermarket suspension control arm bushing.
Extreme testing. Withstands temperatures below -40°C and above 120°C, plus 720 hours of salt spray.
Compatibility checked. Dimensional and material analysis helps ensure a precise OE-to-aftermarket match.
Cross-references B45A-25-450 and KD35-28-450 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Rear Control Arm Bushing
Delphi TD1792W is a standard replacement suspension control arm bushing built for rear upper and rear outer applications where precise alignment and stable suspension movement matter. It is engineered with OE-focused dimensional and material analysis to help maintain proper fit on Mazda suspension systems.
Compatible with select Mazda 3, Mazda 3 Sport, Mazda CX-5, and Mazda 6 applications, this bushing is a direct service part for rear upper at crossmember and rear upper outer positions. Delphi TD1792W is built for drivers replacing worn rear suspension bushings on vehicles such as the Mazda CX-5 and Mazda 6.
Key Features
- Standard replacement suspension control arm bushing
- Length: 49.3 mm
- Inside diameter: 12.2 mm
- Outside diameter: 40.0 mm
- Rear outer and rear upper outer position coverage
- OE-focused dimensional and material analysis for fit consistency
- Tested for temperature extremes below -40°C and above 120°C
- Exposed to 720 hours of salt spray during validation
Detailed Description
Delphi TD1792W is designed as a suspension control arm bushing for rear suspension service on Mazda platforms. The part number TD1792W is associated with rear upper at crossmember and rear upper outer locations, making it a practical replacement when restoring rear suspension geometry and bushing integrity. For Mazda 3, Mazda 3 Sport, Mazda CX-5, and Mazda 6 fitments, this bushing supports OE-style compatibility through careful dimensional and material matching.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear suspension looseness from worn control arm bushings
- Clunking or knocking from deteriorated rear bushing material
- Excessive rear wheel movement under load
- Alignment instability caused by bushing wear
- Uneven tire wear related to rear suspension play
Installation Notes and Tips
Verify the exact rear position on your vehicle before ordering, since this part is listed for rear outer, rear upper outer, and rear upper at crossmember applications. Confirm the vehicle year, model, and suspension location against the application data for TD1792W before installation. Professional suspension service is recommended when replacing control arm bushings.
Quality Assurance
Delphi applies OE-oriented testing and validation to this aftermarket part, including temperature cycling and extended salt-spray exposure, to support durability in demanding road conditions. The brand’s OE expertise is carried into its steering and suspension portfolio for consistent replacement quality.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2021 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2020 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2020 | Mazda | CX-5 | — | Rear Upper Outer | — |
| 2019 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2019 | Mazda | CX-5 | — | Rear Upper Outer | — |
| 2018 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2018 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2018 | Mazda | CX-5 | AWD | Rear Upper Outer | — |
| 2017 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2017 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2016 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2016 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2016 | Mazda | CX-5 | — | Rear Upper Outer | — |
| 2015 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2015 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2015 | Mazda | CX-5 | — | Rear Upper Outer | — |
| 2014 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2014 | Mazda | 3 Sport | — | Rear Upper At Crossmember | — |
| 2014 | Mazda | 6 | — | Rear Upper At Crossmember | — |
| 2014 | Mazda | CX-5 | — | Rear Outer | — |
| 2013 | Mazda | 3 | — | Rear Upper At Crossmember | — |
| 2013 | Mazda | CX-5 | — | Rear Outer | — |
| No rows match your filter. | |||||