/live/media/DE/DE_TD314W_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TD314W Suspension Control Arm Bushing - Front Lower or Front Rearward
| Brand | Delphi TD314W |
|---|---|
| Position | Front Lower |
| Height | 2.165 |
| Height | 55.0 |
| Inside Diameter | 0.748 |
| Inside Diameter | 19.0 |
| Item Grade | Standard Replacement |
| Material | Rubber |
| Mounting Type | Press Fit |
| Outside Diameter | 2.205 |
| Outside Diameter | 56.0 |
| Position(s) | Front Lower, Front Rearward. For the position specific to your vehicle, refer to the Application tab. |
| Wall Thickness | 0.728 |
| Wall Thickness | 18.5 |
| Fits | Daewoo |
OE expertise. Standard replacement bushing built with dimensional and material analysis for compatibility.
Rubber construction. Delivers the compliance and durability expected from a suspension bushing.
Press-fit design. Installs as a direct replacement without extra modifications.
Cross-references 351258, 352335 and 902350 for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Suspension Bushing for Front Lower Control Arms
Delphi TD314W is a standard replacement suspension control arm bushing built with rubber and press-fit mounting for front lower, front rearward applications. It is engineered for drivers who need a direct-fit suspension bushing that matches OE-style dimensions and material characteristics.
For shoppers searching for a Delphi TD314W control arm bushing, this part is a practical choice for restoring suspension geometry and reducing unwanted movement at the control arm pivot point.
Key Features
- Rubber construction for everyday suspension service
- Press-fit mounting type for the specified control arm position
- Standard replacement item grade
- Dimensions: 0.748 in inside diameter, 2.205 in outside diameter, 2.165 in height
- OE-focused dimensional and material analysis for fit consistency
- Tested for temperature extremes from below -40 C to over 120 C
- Exposed to 720 hours of salt spray during validation
Detailed Description
Delphi TD314W is a suspension control arm bushing designed for front lower, front rearward placement where a press-fit rubber bushing is required. Delphi applies OE engineering methods to its aftermarket steering and suspension portfolio, using dimensional and material analysis to support proper part matching. The TD314W part number is a useful reference when comparing replacement options for vehicles that call for this style of bushing, including select Chevrolet and GMC applications.
This Delphi TD314W bushing is built to the listed dimensions and material specification to help maintain control arm location and suspension response. Cross-reference part numbers include Monroe Shocks & Struts 351258 and 352335 for the same application.
What This Part Helps Address
- Excessive play at the control arm bushing
- Clunking or knocking from worn suspension pivot points
- Uneven tire wear caused by loosened suspension geometry
- Steering wander related to deteriorated front suspension bushings
- Harshness or vibration from cracked or compressed rubber
Installation Notes and Tips
Install TD314W only in the front lower, front rearward position specified for your vehicle. Because this is a press-fit bushing, proper removal and installation tools are required to avoid damaging the control arm or the new bushing. Verify inside diameter, outside diameter, and height against the original part before installation, and confirm vehicle-specific application details in the fitment data for your Chevrolet or GMC model.
Quality Assurance
Delphi validates this suspension bushing through temperature cycling and salt-spray exposure to evaluate durability in demanding conditions. The brand’s OE background and dimensional analysis process support consistent aftermarket replacement quality for the Delphi TD314W.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||