/live/media/DE/DE_TD4204W_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TD4204W Suspension Control Arm Bushing - Front Lower Outer
| Brand | Delphi TD4204W |
|---|---|
| Position | Front Lower Outer |
| Color | Gray |
| Inside Diameter | 0.559 |
| Inside Diameter | 14.2 |
| Item Grade | Standard Replacement |
| Length | 2.992 |
| Length | 76.0 |
| Material | Rubber-Steel |
| Mounting Hardware Included | No |
| Mounting Type | Pressed |
| Outside Diameter | 1.638 |
| Outside Diameter | 41.6 |
| Fits | Jeep · 6 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the original part.
Rubber-steel construction. Combines flexibility with strength for dependable suspension performance.
Pressed fit. Installs as a direct bushing replacement.
Cross-references MOOG Chassis Products K200258 and 52088 746AA for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi Front Lower Outer Control Arm Bushing
Delphi TD4204W is a suspension control arm bushing built for the front lower outer position on select Jeep Liberty models. It uses a rubber-steel construction and OE-focused dimensional analysis to support proper fit and consistent suspension performance.
Key Features
- Rubber-steel bushing construction for controlled suspension movement
- Pressed mounting type for direct replacement service
- Gray finish
- Standard replacement grade
- Inside diameter: 14.2 mm (0.559 in)
- Outside diameter: 41.6 mm (1.638 in)
- Length: 76.0 mm (2.992 in)
- Fits the front lower outer position
Detailed Description
Delphi TD4204W is engineered as a suspension control arm bushing for the front lower outer location on 2002-2007 Jeep Liberty models. Delphi applies OE-level dimensional and material analysis to aftermarket steering and suspension parts, and this bushing is built to match the intended fit and material characteristics of the original application. The rubber-steel design helps isolate road vibration while maintaining the control arm connection needed for stable suspension geometry. This part cross-references MOOG Chassis Products K200258 for the same application.
What This Part Helps Address
- Front suspension looseness at the control arm mounting point
- Clunking or knocking from worn bushing material
- Excessive vibration transferred into the chassis
- Uneven suspension movement caused by deteriorated rubber
- Fitment issues when replacing the front lower outer bushing on a Jeep Liberty
Installation Notes and Tips
Fits 2002-2007 Jeep Liberty, front lower outer. This is a pressed bushing, so removal and installation typically require a press and proper suspension service tools. Inspect the control arm and surrounding hardware for wear before installation, and verify the bushing orientation against the original part before pressing it into place. Part number TD4204W is also referenced for this Jeep Liberty application.
Quality Assurance
Delphi subjects its OE-based steering and suspension components to extreme temperature testing from below -40 degrees C to above 120 degrees C, along with 720 hours of salt spray exposure. TD4204W is built to reflect that OE-focused approach for the 2002-2007 Jeep Liberty front lower outer position.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Jeep | Liberty | Front Lower Outer | — |
| 2006 | Jeep | Liberty | Front Lower Outer | — |
| 2005 | Jeep | Liberty | Front Lower Outer | — |
| 2004 | Jeep | Liberty | Front Lower Outer | — |
| 2003 | Jeep | Liberty | Front Lower Outer | — |
| 2002 | Jeep | Liberty | Front Lower Outer | — |
| No rows match your filter. | ||||