/live/media/DE/DE_TD475W_Ang.jpg)
Delphi TD475W Suspension Control Arm Bushing - Front Lower Forward Outer or Front Lower Outer
| Brand | Delphi TD475W |
|---|---|
| Position | Front Lower Outer and Front Lower Forward Outer |
| Material | Rubber |
| Wall Thickness | 0.551 |
| Wall Thickness | 14.0 |
| Inside Diameter | 0.488 |
| Inside Diameter | 12.4 |
| Outside Diameter | 1.591 |
| Outside Diameter | 40.4 |
| Height | 1.476 |
| Height | 37.5 |
| Mounting Type | Press fit |
| Item Grade | Standard replacement |
| Position(s) | Front lower forward outer, front lower outer. for the position sp |
| Fits | Audi · 26 vehicles |
Standard replacement. Press-fit bushing for straightforward service replacement.
Rubber construction. Helps isolate vibration while maintaining a compliant ride.
OE expertise. Delphi applies dimensional and material analysis for compatibility.
Cross-references Beck/Arnley 101-5817, MOOG Chassis Products K200096 and 8E0 407 181 B for the same application. See all 6.
OE-Style Front Control Arm Bushing
The Delphi TD475W is a suspension control arm bushing built for front lower outer and front lower forward outer positions on select Audi applications. It uses a rubber construction and press-fit mounting style to match OE-style service requirements for Audi A4, A4 Quattro, S4, and RS4 models.
Delphi applies OE-focused dimensional and material analysis to help ensure proper fit between the original and replacement part. The TD475W is a standard replacement option for drivers servicing worn front suspension bushings on Audi A4 and Audi S4 platforms.
Key Features
- Rubber bushing construction for suspension isolation
- Press fit mounting type for OE-style installation
- Standard replacement grade
- Dimensions: 0.488 in inside diameter, 1.591 in outside diameter, 1.476 in height
- Metric dimensions: 12.4 mm inside diameter, 40.4 mm outside diameter, 37.5 mm height
- Wall thickness: 0.551 in / 14.0 mm
- Fits front lower outer and front lower forward outer positions, depending on application
Detailed Description
Delphi TD475W is engineered as a suspension control arm bushing for front lower suspension service on select Audi models. It is listed for 2002-2009 Audi A4 and A4 Quattro in the front lower outer position, 2004-2009 Audi S4 in the front lower forward outer position, 2007-2008 Audi RS4 in the front lower forward outer position, and 2006-2007 Audi S4 in the front lower outer position. This part number, TD475W, is a direct-fit style replacement for vehicles that use a press-fit rubber bushing in these locations.
Delphi’s OE testing includes exposure to temperatures below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray testing. That validation, combined with dimensional and material analysis, supports consistent fitment for Audi suspension repair work. This part cross-references Beck/Arnley 101-5817 for the same application.
Common Repair Symptoms
- Front suspension clunking or knocking over bumps
- Excessive play in the control arm area
- Uneven tire wear related to worn suspension bushings
- Steering looseness or vague front-end response
- Visible cracking, splitting, or deterioration in the original bushing
Installation Notes
- Confirm the exact position before ordering: front lower outer or front lower forward outer.
- Press-fit design means proper suspension tools or a hydraulic press are typically required.
- Inspect the control arm and surrounding hardware for wear before installation.
- Verify vehicle application by year, model, and suspension position for Audi A4, A4 Quattro, S4, and RS4.
Quality Assurance
Delphi uses OE-based engineering and testing methods for its aftermarket steering and suspension portfolio. The TD475W is built to meet standard replacement expectations with material and dimensional checks intended to support accurate fitment on Audi A4, Audi A4 Quattro, Audi S4, and Audi RS4 applications.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2009 | Audi | A4 | Convertible | Front Lower Outer | — |
| 2009 | Audi | A4 Quattro | Convertible | Front Lower Outer | — |
| 2009 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2008 | Audi | A4 | — | Front Lower Outer | — |
| 2008 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2008 | Audi | RS4 | — | Front Lower Forward Outer | — |
| 2008 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2007 | Audi | A4 | — | Front Lower Outer | — |
| 2007 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2007 | Audi | RS4 | — | Front Lower Forward Outer | — |
| 2007 | Audi | S4 | — | Front Lower Outer | — |
| 2007 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2006 | Audi | A4 | — | Front Lower Outer | — |
| 2006 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2006 | Audi | S4 | — | Front Lower Outer | — |
| 2006 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2005 | Audi | A4 | — | Front Lower Outer | — |
| 2005 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2005 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2004 | Audi | A4 | — | Front Lower Outer | — |
| 2004 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2004 | Audi | S4 | — | Front Lower Forward Outer | — |
| 2003 | Audi | A4 | — | Front Lower Outer | — |
| 2003 | Audi | A4 Quattro | — | Front Lower Outer | — |
| 2002 | Audi | A4 | — | Front Lower Outer | — |
| 2002 | Audi | A4 Quattro | — | Front Lower Outer | — |
| No rows match your filter. | |||||