/live/media/RB/RB_539019_Fro.jpg)
Dorman 539-019 Alignment Caster / Camber Ball Joint - Front Upper or Rear Upper
| Brand | Dorman 539-019 |
|---|---|
| Position | Front Upper and Rear Upper |
| Material | Steel |
| Maximum Outside Diameter | 48 |
| Stud Thread Diameter | 10 |
| Castle Nut Included | Yes |
| Suspension Grade Type | Standard |
| Dust Boot Included | Yes |
| Ball Joint Assembly | Yes |
| Cotter Pin Hole | Yes |
| Grade Type | Regular |
| Mounting Hole Quantity | 0 |
| Adjustable | Yes |
| Greaseable | No |
| Stud Type | Tapered |
| Mounting Type | Bolt on |
| Adjustment Range | -1.5 deg to + 1.5 deg |
| Locking Nut Included | Yes |
| Package Contents | Ball joint; top cap; slide plate; castle nut; cotter pin and moun |
| Thread Pitch | 1.25 |
| Fits | Honda · 18 vehicles |
OE replacement. Precision-engineered and rigorously tested for reliable fit and function.
Adjustable design. Helps fine-tune caster and camber settings with a -1.5° to +1.5° range.
Steel construction. Built with a dust boot, tapered stud, and bolt-on mounting.
Cross-references Mevotech Original Grade GK90492 and Mevotech Supreme MK90492 for the same application. See all 2.
Dorman 539-019 Alignment Ball Joint
Dorman 539-019 is a steel alignment caster and camber ball joint built for specific Honda Prelude applications. It provides adjustable camber correction for the front upper and rear upper suspension positions on select 1992-2001 Honda Prelude models.
Key Features
- Steel construction for suspension service applications
- Adjustable design with a -1.5 degree to +1.5 degree camber range
- Ball joint assembly with dust boot included
- Stud type: tapered with 10 mm stud thread diameter and 1.25 thread pitch
- Castle nut, locking nut, and cotter pin hole included
- Bolt-on mounting type for direct replacement use
- Standard suspension grade type
Application Details
This Dorman 539-019 alignment caster and camber ball joint is engineered as a replacement for the original equipment on select Honda Prelude models. It is used to restore alignment adjustability on 1992-2001 Honda Prelude rear upper applications and 1992-1996 Honda Prelude front upper applications. This part cross-references Mevotech Original Grade GK90492 and Mevotech Supreme MK90492 for the same application.
- Fits 1992-2001 Honda Prelude, rear upper, adjusts camber -1.50 degrees to +1.50 degrees
- Fits 1992-1996 Honda Prelude, front upper, adjusts camber -1.50 degrees to +1.50 degrees
What It Helps Correct
- Improper camber angle after suspension wear or service
- Alignment drift on Honda Prelude front upper or rear upper suspension
- Uneven tire wear caused by incorrect camber settings
- Difficulty bringing the vehicle back into alignment specification
- Worn or damaged OE-style caster/camber adjustment hardware
Installation Notes
Verify vehicle position and alignment requirements before installation. This part uses a bolt-on mounting type and includes a dust boot, castle nut, locking nut, and cotter pin hole for service setup. After installation on a Honda Prelude, a professional wheel alignment is required to set camber within the specified adjustment range.
Quality Assurance
Dorman states this replacement part is precision-engineered and rigorously tested to provide reliable OE-style service on the listed vehicles. The design follows standard suspension-grade construction for alignment correction on specific Honda Prelude applications.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2001 | Honda | Prelude | Base | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 2000 | Honda | Prelude | Base | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1999 | Honda | Prelude | Base | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1998 | Honda | Prelude | Type SH | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1997 | Honda | Prelude | Base | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1996 | Honda | Prelude | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1996 | Honda | Prelude | — | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1995 | Honda | Prelude | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1995 | Honda | Prelude | — | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1994 | Acura | Vigor | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1994 | Honda | Prelude | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1994 | Honda | Prelude | — | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1993 | Acura | Vigor | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1993 | Honda | Prelude | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1993 | Honda | Prelude | — | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1992 | Acura | Vigor | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1992 | Honda | Prelude | — | Front Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| 1992 | Honda | Prelude | — | Rear Upper | Adjusts Camber -1.50 Degrees to +1.50 Degrees |
| No rows match your filter. | |||||