Dorman 544-756 Suspension Stabilizer Bar Link Kit - Rear Right
| Brand | Dorman 544-756 |
|---|---|
| Position | Rear Right |
| Wall Thickness | 4.21 |
| 11591 | Metric |
| 11591 | Métrico |
| 11592 | Metric |
| 11592 | Métrico |
| Length | 110 |
| End 1 Type | Roscado |
| End 1 Type | Threaded |
| End 2 Type | Roscado |
| End 2 Type | Threaded |
| Pre-Greased | Oui |
| Pre-Greased | Sí |
| Pre-Greased | Yes |
| Castle Nut Included | Oui |
| Castle Nut Included | Sí |
| Castle Nut Included | Yes |
| Bushings Included | No |
| Bushings Included | Non |
| Dust Boot Included | Oui |
| Dust Boot Included | Sí |
| Dust Boot Included | Yes |
| Grease Fittings Included | No |
| Grease Fittings Included | Non |
| Cotter Pin Included | No |
| Cotter Pin Included | Non |
| Washers Included | No |
| Washers Included | Non |
| Grade Type | Reemplazo estándar |
| Grade Type | Standard replacement |
| Bolts Included | No |
| Fits | Genesis, Hyundai, and Kia · 15 vehicles |
OE-style replacement. Precision-engineered for reliable suspension service on specific applications.
Threaded ends. 12 mm connections at both ends for a direct-fit link design.
Pre-greased design. Includes a dust boot and locking nuts for service-ready assembly.
Cross-references MOOG Chassis Products K751051, 55531GI000 and X18SL0801 for the same application. See all 3.
Overview
Dorman 544-756 is a standard replacement suspension stabilizer bar link kit built for specific rear right applications. It is engineered and tested to replace the original equipment design on select EV platforms, with threaded ends and pre-greased construction for service-ready installation.
Key Features
- Standard replacement stabilizer bar link kit for suspension service
- Threaded end connections with 12 mm thread size at both ends
- Pre-greased design with a dust boot for added protection
- Polymer bearing material and polychloroprene boot material
- Includes locking nuts and hardware
Detailed Description
This Dorman stabilizer bar link kit, part number 544-756, is intended for rear right suspension applications that require an OE-style replacement link. The design uses threaded ends, a 110 mm length, and a 4.21 wall thickness to match the original configuration on compatible vehicles. It is a practical choice for Hyundai Ioniq 5, Hyundai Ioniq 6, Genesis GV60, and Kia EV6 fitments where the stabilizer link must restore proper sway bar connection and suspension response.
This part cross-references MOOG Chassis Products K751051 for the same application.
What It Helps Fix
- Clunking or rattling from a worn stabilizer link
- Excessive play in the rear suspension connection
- Reduced sway bar effectiveness during cornering
- Noise caused by degraded link joints or boots
Installation Notes
Fits 2023-2025 Genesis GV60, rear right. Fits 2022-2025 Hyundai Ioniq 5, rear right. Fits 2025 Hyundai Ioniq 5 N, rear right. Fits 2023-2025 Hyundai Ioniq 6, rear right. Fits 2022-2025 Kia EV6, rear right. Verify thread size, length, and mounting orientation before installation. Part number 544-756 should be matched to the vehicle's rear right suspension configuration before service.
Quality Assurance
Dorman states this stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Genesis | GV60 | Rear Right | — |
| 2025 | Hyundai | Ioniq 5 | Rear Right | — |
| 2025 | Hyundai | Ioniq 5 N | Rear Right | — |
| 2025 | Hyundai | Ioniq 6 | Rear Right | — |
| 2025 | Kia | EV6 | Rear Right | — |
| 2024 | Genesis | GV60 | Rear Right | — |
| 2024 | Hyundai | Ioniq 5 | Rear Right | — |
| 2024 | Hyundai | Ioniq 6 | Rear Right | — |
| 2024 | Kia | EV6 | Rear Right | — |
| 2023 | Genesis | GV60 | Rear Right | — |
| 2023 | Hyundai | Ioniq 5 | Rear Right | — |
| 2023 | Hyundai | Ioniq 6 | Rear Right | — |
| 2023 | Kia | EV6 | Rear Right | — |
| 2022 | Hyundai | Ioniq 5 | Rear Right | — |
| 2022 | Kia | EV6 | Rear Right | — |
| No rows match your filter. | ||||