/live/media/RB/RB_610402_Fro.jpg)
Dorman 610-402 Wheel Lug Stud - Front or Rear
| Brand | Dorman 610-402 |
|---|---|
| Position | Front |
| Bolt Grade | 10.9 |
| Color | Silver |
| Head Diameter | 18.29 mm |
| Length | 43.18 |
| Material | Steel |
| Package Contents | 10 Studs |
| Quick-Start Nose | No |
| SAE or Metric | Metric |
| Shoulder Diameter | 12.09 |
| Shoulder Length (In) | 13.97 mm |
| Splined Bore Diameter | 12.58 |
| Style | Serrated Stud |
| Thread Diameter | 12 |
| Thread Direction | Clockwise |
| Thread Length (In) | 29.21 mm |
| Thread Pitch | 1.25 |
| Thread Size | M12-1.25 |
| Fits | Subaru |
Carbon steel construction. Built for strength, longevity, and safety.
Serrated stud design. Helps deliver a secure, reliable wheel fastening.
Metric thread size. M12-1.25 threading for precise hardware matching.
Cross-references TYC 97313, 23621GA020 and 27839B for the same application. See all 4.
Wheel Lug Stud for Metric Wheel Service
Dorman 610-402 is a metric wheel lug stud built from steel and tested to automotive industry standards for strength, longevity, and safety. It is a serrated stud with an M12-1.25 thread, making it a direct-fit style hardware choice for wheel service on select applications that use a clockwise thread direction.
For technicians and DIY repairs on vehicles such as Honda Civic and Toyota Corolla, this lug stud supports secure wheel retention when replacing damaged or worn wheel hardware. The Dorman 610-402 part number is also commonly searched as 610-402 for OE-style wheel stud replacement needs.
Key Features
- Steel construction for wheel hardware durability
- Metric M12-1.25 thread size with clockwise thread direction
- Serrated stud design for press-in wheel hub applications
- 43.18 mm overall length with 29.21 mm thread length
- 10.9 bolt grade for demanding automotive use
- Silver finish for a clean service replacement appearance
- Head diameter: 18.29 mm; shoulder diameter: 12.09 mm; splined bore diameter: 12.58 mm
Detailed Description
Dorman 610-402 is a wheel lug stud engineered for vehicles that require an M12-1.25 serrated stud with a 12 mm thread diameter. The carbon steel construction and 10.9 bolt grade support the strength requirements of wheel fastening, while the serrated shoulder helps the stud seat properly in the hub during replacement. If you are searching for a wheel lug stud for Honda Civic or Toyota Corolla wheel repair, this part number is a relevant OE-style hardware reference.
This part cross-references TYC 97313 for the same application. The Dorman 610-402 part number is also referenced alongside OE-style numbers used in wheel stud service, including 23621GA020 and 27839B.
Common Problems It Can Address
- Stripped or damaged wheel stud threads
- Broken studs from over-torquing or corrosion
- Wheel mounting issues after hub or brake service
- Loose wheel retention caused by worn hardware
- Replacement needs after wheel removal damage
Installation Notes and Tips
Confirm thread size, pitch, shoulder diameter, and stud length before installation. This serrated stud is intended for press-in style hub applications, so the hub design must match the stud’s splined bore and shoulder dimensions. Always torque wheel nuts to the vehicle manufacturer’s specification after installation and recheck torque after initial driving if required by service procedure.
Quality Assurance
Dorman states that these wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to support strength, longevity, and safety. That makes 610-402 a practical replacement choice for wheel hardware service where material quality and dimensional accuracy matter.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||