/live/media/RB/RB_951050_Generic.jpg)
OE Quality
60-Day Returns
Dorman 951-050 Wheel Bearing and Hub Assembly - Front
Dorman 951-050 Front Wheel Hub Assembly
Dorman 951-050 is a replacement wheel bearing and hub assembly for specific front applications on 1987-1990 Dodge Dakota. It combines the hub and critical bearing replacement components in one repair part for service on the front axle.
Key Features
- Replacement wheel bearing and hub assembly for front use
- Fits 1987-1990 Dodge Dakota, front
- 26-spline hub design
- 5 wheel studs included with 12 mm stud size
- Flange included with a rectangular flange shape
- 4 flange bolt holes with 12.7 mm hole diameter
- Bolt circle diameter: 114.3 mm
- Hub pilot diameter: 85.8 mm
- Wheel pilot diameter: 71.35 mm
- Brake pilot diameter: 73.2 mm
- ABS sensor not included
Detailed Description
This Dorman wheel bearing and hub assembly is built for direct replacement on select Dodge Dakota front applications. It is specified for 1987-1990 Dodge Dakota, front, and includes the hub plus the critical bearing replacement components needed for a complete repair on the listed vehicle range. The assembly uses a 26-spline configuration, a 114.3 mm bolt circle diameter, and a rectangular flange layout to match the required mounting dimensions. Dorman 951-050 also cross-references Timken 513082 for the same application.
Common Repair Uses
- Front wheel bearing noise or rough rotation
- Excessive hub play or looseness at the wheel end
- Damaged wheel studs or worn hub mounting surfaces
- Service replacement for a worn front hub assembly on Dodge Dakota
- Restoring proper wheel mounting geometry on the front axle
Installation Notes and Tips
Verify the front application, spline count, bolt circle, and pilot diameters before installation. Confirm that the vehicle does not require an ABS sensor at the hub, since this assembly is listed without one. Always inspect the mating surfaces, fasteners, and surrounding suspension components during hub service to help ensure a proper repair on the Dodge Dakota front end.
Quality Assurance
Dorman replacement parts are engineered to match the specified application details and support direct-fit service on the listed vehicles. Part number 951-050 is built as a replacement hub assembly for the confirmed Dodge Dakota fitment shown above.
| Brand | Dorman |
|---|---|
| Part Number | 951-050 |
| Spline Quantity | 26 |
| Flange Included | Yes |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Size | 12 |
| Wheel Pilot Diameter | 71.35 |
| Brake Pilot Diameter | 73.2 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 85.8 |
| Flange Shape | Rectangular |
| Flange Bolts Included | No |
| Anti Lock Braking System | No |
| Anti Lock Brake Sensor Included | No |
| Connector Quantity | 0 |
| Flange Bolt Hole Diameter | 12.7 |
| Flange Offset | 53.65 |
| Flange Diameter | 114.3 |
| Bolt Circle Diameter | 114.3 mm |
| Package Contents | 1 wheel hub assembly |
This part fits 4 vehicles. Search below:
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1990 | Dodge | Dakota | 4WD | Front | |
| 1989 | Dodge | Dakota | 4WD | Front | |
| 1988 | Dodge | Dakota | 4WD | Front | |
| 1987 | Dodge | Dakota | 4WD | Front |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.