/live/media/DB/DB_H380116_Fro.jpg)
OE Quality
60-Day Returns
/live/media/DB/DB_H380116_Fro.jpg)
/live/media/DB/DB_H380116_Ang.jpg)
/live/media/DB/DB_H380116_Sid.jpg)
/live/media/DB/DB_H380116_Top.jpg)
/live/media/DB/DB_H380116_Zz2.jpg)
/live/media/DB/DB_H380116_Zz3.jpg)
Dorman H380116 Brake Hydraulic Hose - Rear Left or Rear Right
Dorman Brake Hydraulic Hose H380116
This Dorman brake hydraulic hose is engineered as a direct replacement for the original hose on select Toyota MR2 rear positions. Built for the 1991-1995 Toyota MR2, it supports reliable brake fluid transfer with the fit and function expected in a complete brake repair.
Key Features
- Direct replacement brake hydraulic hose for select Toyota MR2 applications
- Compatible with rear left and rear right positions
- Black EPDM rubber hose construction with a rubber outer sleeve
- Banjo end 1 fitting and female end 2 fitting for OE-style routing
- Treated steel fittings with a stamped steel bracket
- Includes gaskets or seals for installation
- Overall length: 17.13 in.
Detailed Description
Dorman H380116 is a flexible brake hose designed to match the original hose’s fit, function, and performance on specific Toyota MR2 rear brake locations. The hose uses EPDM rubber for durability, treated steel end fittings, and a stamped steel bracket to support proper positioning. This part cross-references Raybestos Brakes BH380116 for the same application.
Compatible With 1991-1995 Toyota MR2 rear left and rear right brake hose locations, this part number H380116 is a practical OE-style replacement for brake service on the Toyota MR2. The included gaskets help complete the connection at the brake system interface.
What It Helps Address
- Cracked or deteriorated brake hose rubber
- Brake fluid seepage at hose connections
- Restricted brake fluid flow from an aging flexible line
- Soft or inconsistent brake pedal feel caused by hose wear
- Corrosion or damage at the hose fittings or bracket area
Installation Notes and Tips
Install on the confirmed rear left or rear right position for the listed Toyota MR2 model years. Inspect the mating hard line, caliper connection, and mounting points before installation. Because mounting hardware is not included, reuse or source the required fasteners as needed. Bleed the brake system after installation to remove air and verify a firm pedal.
Quality Assurance
Dorman manufactures this brake hydraulic hose to match the original part’s fit and function on the specified vehicle applications. The H380116 is built for safe, long-lasting service as part of a complete brake repair.
| Brand | Dorman |
| Part Number | H380116 |
| Color | Black |
| Outer Sleeve Material | Rubber |
| Mounting Hardware Included | No |
| Bracket Included | Yes |
| Gasket Or Seal Included | Yes |
| Bracket Material | Stamped steel |
| End 1 Fitting Material | Treated steel |
| End 1 Fitting Type | Banjo |
| End 2 Fitting Material | Treated steel |
| End 2 Fitting Type | Female |
| Overall Length | 17.13 |
| Jacket Included | No |
| Describe Type | Flexible hose |
| End 1 Thread Diameter | 10 mm |
| End 2 Fitting Inside Diameter | M10 x 1.0 |
| Hose Material | Epdm rubber |
| Package Contents | 1 brake hose; gaskets |
This part fits 10 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1995 | Toyota | MR2 | Rear Left | |
| 1995 | Toyota | MR2 | Rear Right | |
| 1994 | Toyota | MR2 | Rear Left | |
| 1994 | Toyota | MR2 | Rear Right | |
| 1993 | Toyota | MR2 | Rear Left | |
| 1993 | Toyota | MR2 | Rear Right | |
| 1992 | Toyota | MR2 | Rear Left | |
| 1992 | Toyota | MR2 | Rear Right | |
| 1991 | Toyota | MR2 | Rear Left | |
| 1991 | Toyota | MR2 | Rear Right |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.