Dorman H622261 Brake Hydraulic Hose - Front Left

Brake Hose for Hyundai Sonata Front Left

This Dorman brake hydraulic hose is engineered to match the original hose’s fit, function, and performance on specific vehicles and positions. It is a direct replacement for the front left brake line on 2011-2014 Hyundai Sonata models, including applications where a flexible hose, banjo fitting, and flared female connection are required.

Key Features

• Direct replacement brake hydraulic hose for the front left position
• Fits 2011-2014 Hyundai Sonata, front left
• Black EPDM rubber hose with an outer rubber sleeve
• Banjo fitting on end 1 and female flared fitting on end 2
• Treated steel end fittings with stamped steel bracket
• Gaskets included; mounting hardware not included
• Overall length: 21.85 in.; axis 1 length: 20.15 in.
• Cross-reference part numbers include 587313Q100 and BH144602

Detailed Description

Dorman H622261 is a brake hydraulic hose built for the front left side of 2011-2014 Hyundai Sonata vehicles. The hose uses EPDM rubber construction for flexibility and durability, with treated steel fittings and an included bracket to match the original routing and connection style. Dorman H622261 is a practical OE-style replacement when the factory hose is cracked, leaking, swollen, or no longer holding proper brake pressure. This part also cross-references Raybestos Brakes BH383455 for the same application.

Common Brake Hose Issues It Can Address

• Brake fluid seepage at the hose or fitting
• Soft or spongy brake pedal caused by hose deterioration
• Cracking, swelling, or dry rot in the rubber hose
• Corrosion or damage at the hose ends or bracket area
• Restricted brake fluid flow from an aging flexible line

Installation Notes and Tips

Install this hose only on the specified front left position for 2011-2014 Hyundai Sonata models. Verify the vehicle is not equipped with Sport Suspension, since that configuration is not listed for this part. Replace gaskets during installation, inspect the hard line and caliper connection surfaces, and bleed the brake system after installation to remove air from the hydraulic circuit.

Quality Assurance

This Dorman brake hose is precision-engineered to match original fit and function for the listed application. It is built as a replacement component for complete brake repair on the specified Hyundai Sonata fitment.