/live/media/PH/PH_29512252_Fro.jpg)
DuraGo 295-12252 Wheel Bearing and Hub Assembly - Rear
| Brand | DuraGo 295-12252 |
|---|---|
| Position | Rear |
| 143 | 114.3 |
| 143 | 4.5 |
| Wheel Stud Size | M12 x 1.5 |
| Wheel Pilot Diameter | 2.31 |
| Wheel Pilot Diameter | 58.7 |
| Brake Pilot Diameter | 2.64 |
| Brake Pilot Diameter | 67 |
| Wheel Stud Quantity | 4 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 2.68 |
| Hub Pilot Diameter | 68 |
| Anti Lock Braking System | No |
| Flange Offset | 2.22 |
| Flange Offset | 56.5 |
| Flange Diameter | 140.2 |
| Flange Diameter | 5.52 |
| Driven Or Non-Driven Type Hub Assembly | Non-driven |
| Fits | Volvo · 9 vehicles |
Premium hub assembly. Reduces friction and can help improve fuel economy.
100% tested. Each unit is checked to meet strict quality standards.
Wheel studs included. Ready for a more complete hub assembly replacement.
Cross-references SKF BR930257, Timken HA590257 and 512252 for the same application. See all 9.
DuraGo Rear Wheel Bearing Hub Assembly
The DuraGo 295-12252 wheel bearing and hub assembly is built for rear applications on select Volvo V40 and Volvo S40 models. It combines the hub and bearing into one service unit to help restore smooth wheel rotation, reduce friction, and support consistent driveline performance.
For drivers searching for a rear wheel bearing hub assembly for 2000-2004 Volvo V40 or 2000-2003 Volvo S40, this DuraGo unit is built to match key OE-style dimensions and mounting points.
Key Features
- Part number: 295-12252
- Rear non-driven wheel bearing and hub assembly
- Fits 2000-2004 Volvo V40, rear
- Fits 2000-2003 Volvo S40, rear
- Wheel stud size: M12 x 1.5
- Wheel stud quantity: 4
- Wheel studs included: Yes
- Anti-lock braking system: No
- Hub pilot diameter: 68 mm
- Wheel pilot diameter: 58.7 mm
- Brake pilot diameter: 67 mm
- Flange diameter: 140.2 mm
- Flange offset: 56.5 mm
Detailed Description
DuraGo 295-12252 is a rear wheel bearing and hub assembly engineered for non-driven rear positions on Volvo V40 and Volvo S40 vehicles from the early 2000s. The assembly uses quality components and is tested to meet DuraGo’s manufacturing standards, with dimensions that support proper wheel mounting and brake interface alignment. This part cross-references SKF BR930257 and Timken HA590257 for the same application.
When replacing a worn rear hub on a Volvo V40 or Volvo S40, this assembly helps address noise, looseness, and uneven wheel rotation while maintaining the correct hub pilot, flange, and stud specifications. The DuraGo 295-12252 is a direct-fit service part for rear axle applications where the original hub assembly has reached the end of its service life.
What This Part Helps Solve
- Rear wheel bearing noise or growling
- Wheel play or looseness at the hub
- Rough or inconsistent wheel rotation
- Vibration related to hub wear
- Brake and wheel mounting issues caused by worn hub surfaces
Installation Notes and Tips
Confirm rear-position fitment before ordering. Verify hub pilot diameter, wheel pilot diameter, brake pilot diameter, flange offset, and stud size against the original part on the vehicle. For 2000-2004 Volvo V40 rear and 2000-2003 Volvo S40 rear applications, inspect surrounding suspension and brake components during replacement so the new hub assembly can be installed on a clean, properly prepared mounting surface.
Quality Assurance
DuraGo has over 45 years of aftermarket manufacturing experience, and its hub assemblies are assembled with quality components and 100% tested before release. This part is manufactured to industry-leading quality standards and meets ISO/TS 16949:2002 requirements.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Volvo | V40 | Rear | — |
| 2003 | Volvo | S40 | Rear | — |
| 2003 | Volvo | V40 | Rear | — |
| 2002 | Volvo | S40 | Rear | — |
| 2002 | Volvo | V40 | Rear | — |
| 2001 | Volvo | S40 | Rear | — |
| 2001 | Volvo | V40 | Rear | — |
| 2000 | Volvo | S40 | Rear | — |
| 2000 | Volvo | V40 | Rear | — |
| No rows match your filter. | ||||