/live/media/PH/PH_29512338_Fro.jpg)
DuraGo 295-12338 Wheel Bearing and Hub Assembly - Rear
| Brand | DuraGo 295-12338 |
|---|---|
| Position | Rear |
| Spline Quantity | 26 |
| 143 | 114.3 |
| 143 | 4.5 |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Wheel Pilot Diameter | 2.36 |
| Wheel Pilot Diameter | 60 |
| Brake Pilot Diameter | 2.44 |
| Brake Pilot Diameter | 62 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 3.13 |
| Hub Pilot Diameter | 79.4 |
| Flange Shape | Trapezoid |
| Flange Bolts Included | No |
| Anti Lock Braking System | No |
| Flange Bolt Hole Diameter | 0.42 |
| Flange Bolt Hole Diameter | 10.7 |
| Flange Offset | 2.72 |
| Flange Offset | 69 |
| Flange Diameter | 151.9 |
| Flange Diameter | 5.98 |
| Driven Or Non-Driven Type Hub Assembly | Driven |
| Fits | Toyota · 5 vehicles |
Driven hub assembly. Built for smooth power transfer and dependable wheel support.
Wheel studs included. Ready for a more complete hub replacement out of the box.
ISO/TS 16949:2002 quality. Manufactured to rigorous industry standards and fully tested.
Cross-references MOOG Hub Assemblies 512338, Timken HA594505 and 0516281 for the same application. See all 7.
DuraGo 295-12338 Rear Wheel Hub Assembly
The DuraGo 295-12338 is a rear driven wheel bearing and hub assembly for 2001-2005 Toyota RAV4 applications. Built with quality components and fully tested before release, it is a direct-fit replacement for worn rear hub units that can affect drivability and wheel-end performance.
Key Features
- Fits 2001-2005 Toyota RAV4, rear
- Driven hub assembly for rear wheel-end service
- 26-spline design
- 5 wheel studs with M12 x 1.5 stud size
- 4-bolt flange pattern with trapezoid flange shape
- Hub pilot diameter: 79.4 mm
- Wheel pilot diameter: 60 mm
- Brake pilot diameter: 62 mm
- Flange diameter: 151.9 mm
- Flange offset: 69 mm
- ABS sensor provision: No
Detailed Description
This DuraGo wheel bearing and hub assembly is engineered for rear service on the Toyota RAV4 and is identified by part number 295-12338. It is built to reduce friction at the wheel end and restore smooth hub operation when the original assembly shows wear, noise, or looseness. DuraGo assembles each unit with quality components and tests every hub assembly to meet its manufacturing standards. This part cross-references Timken HA594505 for the same application.
Common Issues Addressed
- Rear wheel bearing noise or growling
- Wheel play or looseness at the hub
- Uneven wheel-end rotation caused by wear
- Vibration or roughness from a deteriorated rear hub assembly
- Loss of driveline efficiency from excess friction
Installation Notes and Tips
Verify rear fitment on 2001-2005 Toyota RAV4 models before ordering. Confirm the 26-spline configuration, 5-stud pattern, and hub dimensions against the original part. Clean the mounting surface thoroughly and inspect related brake and suspension components during replacement. Because this assembly is for a driven rear application and does not include flange bolts, reuse or source the correct fasteners as needed for the vehicle.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience, and this hub assembly is produced to ISO/TS 16949:2002 quality standards. Each unit is 100% tested to help ensure consistent fit and performance for Toyota RAV4 rear hub replacement service.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2005 | Toyota | RAV4 | AWD | Rear | — |
| 2004 | Toyota | RAV4 | AWD | Rear | — |
| 2003 | Toyota | RAV4 | AWD | Rear | — |
| 2002 | Toyota | RAV4 | AWD | Rear | — |
| 2001 | Toyota | RAV4 | AWD | Rear | — |
| No rows match your filter. | |||||