/live/media/PH/PH_29512409_Fro.jpg)
DuraGo 295-12409 Wheel Bearing and Hub Assembly - Rear
| Brand | DuraGo 295-12409 |
|---|---|
| Position | Rear |
| 143 | 114.3 |
| 143 | 4.5 |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Wheel Pilot Diameter | 2.64 |
| Wheel Pilot Diameter | 67 |
| Brake Pilot Diameter | 2.83 |
| Brake Pilot Diameter | 72 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 3.07 |
| Hub Pilot Diameter | 78 |
| Flange Shape | Modified |
| Flange Bolts Included | No |
| Anti Lock Braking System | Yes |
| Anti Lock Braking System Type | Encoder |
| Flange Offset | 2.48 |
| Flange Offset | 63 |
| Flange Diameter | 140 |
| Flange Diameter | 5.51 |
| Driven Or Non-Driven Type Hub Assembly | Non-driven |
| Flange Bolt Size | M12 x 1.25 |
| Fits | Mazda · 5 vehicles |
OE-style hub assembly. Built as a non-driven replacement with ABS encoder compatibility.
Wheel studs included. Ready for assembly with five studs and a modified flange shape.
Quality tested. Each hub unit is 100% tested to meet ISO/TS 16949:2002 standards.
DuraGo Rear Wheel Bearing Hub Assembly
The DuraGo 295-12409 wheel bearing and hub assembly is built for rear applications on the 2009-2013 Mazda 6. It combines the hub and bearing into one service unit to help restore smooth wheel rotation, reduce friction, and support fuel economy after wear has developed.
For Mazda 6 rear hub replacement needs, this assembly is engineered with the correct pilot and stud specifications for a direct-service fit. The DuraGo 295-12409 is a practical choice when addressing noise, looseness, or ABS-related hub wear on the rear axle.
Key Features
- Fits 2009-2013 Mazda 6, rear
- Wheel bearing and hub assembly for non-driven rear applications
- ABS encoder type included for vehicles equipped with anti-lock braking systems
- Wheel stud size: M12 x 1.5
- Wheel studs included
- Hub pilot diameter: 78 mm
- Wheel pilot diameter: 67 mm
- Brake pilot diameter: 72 mm
- Flange diameter: 140 mm
- Flange offset: 63 mm
- Flange bolt size: M12 x 1.25
- Modified flange shape
Detailed Description
DuraGo 295-12409 is a rear wheel bearing and hub assembly for the 2009, 2010, 2011, 2012, and 2013 Mazda 6. It is designed as a non-driven hub assembly with an ABS encoder type, making it suitable for rear wheel service where the original hub has worn, developed play, or triggered ABS concerns. DuraGo assembles these units with quality components and tests each hub assembly to meet its manufacturing standards. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Rear wheel bearing noise such as humming or growling
- Excessive wheel play or looseness at the hub
- ABS warning light concerns related to hub sensor encoding
- Uneven wheel rotation caused by worn hub components
- Vibration from a deteriorated rear hub assembly
Installation Notes and Tips
Confirm rear fitment on the Mazda 6 before installation and verify the hub pilot, wheel pilot, and brake pilot dimensions against the original part. Inspect the mounting flange, axle area, and ABS tone/encoder interface for wear or contamination before installing the new assembly. Proper torque procedures and clean mating surfaces are important for accurate hub seating and reliable brake and wheel alignment.
Quality Assurance
DuraGo manufactures this hub assembly to industry-leading quality standards and states that its hub assemblies are 100% tested before release. The brand also notes compliance with ISO/TS 16949:2002 manufacturing standards.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2013 | Mazda | 6 | Rear | — |
| 2012 | Mazda | 6 | Rear | — |
| 2011 | Mazda | 6 | Rear | — |
| 2010 | Mazda | 6 | Rear | — |
| 2009 | Mazda | 6 | Rear | — |
| No rows match your filter. | ||||