/live/media/PH/PH_29515026_Fro.jpg)
DuraGo 295-15026 Wheel Bearing and Hub Assembly - Front
| Brand | DuraGo 295-15026 |
|---|---|
| Position | Front |
| Spline Quantity | 42 |
| 143 | 114.3 |
| 143 | 4.5 |
| Flange Bolt Hole Quantity | 3 |
| Wheel Stud Size | 1/2-20 |
| Wheel Pilot Diameter | 2.77 |
| Wheel Pilot Diameter | 70.4 |
| Brake Pilot Diameter | 2.83 |
| Brake Pilot Diameter | 71.9 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 100.1 |
| Hub Pilot Diameter | 3.94 |
| Flange Shape | Triangle |
| Flange Bolts Included | No |
| Anti Lock Braking System | No |
| Flange Offset | 2.21 |
| Flange Offset | 56.2 |
| Flange Diameter | 149.4 |
| Flange Diameter | 5.88 |
| Driven Or Non-Driven Type Hub Assembly | Driven |
| Flange Bolt Size | M12 x 1.75 |
| Fits | Ford and Mazda · 9 vehicles |
Driven hub assembly. Built for smooth power transfer and reduced friction.
Wheel studs included. Ready for a more complete hub service.
100% tested. Each unit is checked to meet strict quality standards.
Cross-references SKF BR930341, Timken 515026 and 0516168 for the same application. See all 9.
DuraGo Wheel Bearing and Hub Assembly
DuraGo 295-15026 is a front driven wheel bearing and hub assembly for select Ford Ranger and Mazda B3000/B4000 applications. It is built with quality components and 100% tested to help restore smooth wheel rotation, reduce friction, and support efficient operation.
- Front driven wheel bearing and hub assembly
- 42-spline design with 5 wheel studs included
- Wheel stud size: 1/2-20
- Flange bolt hole quantity: 3
- Triangle flange shape with M12 x 1.75 flange bolt size
- Wheel pilot diameter: 70.4 mm (2.77 in.)
- Brake pilot diameter: 71.9 mm (2.83 in.)
- Hub pilot diameter: 100.1 mm (3.94 in.)
- Flange diameter: 149.4 mm (5.88 in.)
- Flange offset: 56.2 mm (2.21 in.)
- Driven hub assembly with no ABS provision
This DuraGo hub assembly is engineered for front-end service on 1998-2000 Ford Ranger and 1998-2000 Mazda B3000/B4000 models, including 2000 Ford Ranger and 2000 Mazda B3000/B4000 with 1st Design; Pulse Vacuum Hub Locks. It cross-references Timken 515026 for the same application. Use DuraGo 295-15026 when replacing a worn front hub on a Ford Ranger or Mazda B3000/B4000 to address bearing noise, looseness, vibration, or uneven wheel support.
What It Helps Fix
- Front wheel bearing noise or growling
- Wheel play or looseness at the hub
- Vibration from a worn hub assembly
- Rough wheel rotation caused by bearing wear
- Loss of smooth front-end support on Ranger and B-series trucks
Installation Notes
Verify the vehicle’s front hub configuration before installation, especially on 2000 Ford Ranger and 2000 Mazda B3000/B4000 models with 1st Design; Pulse Vacuum Hub Locks. Confirm spline count, stud size, pilot diameters, and flange dimensions against the original part before service. Clean the mounting surfaces and inspect related driveline and brake components during replacement.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience. This hub assembly is assembled with high-quality components, 100% tested, and produced to industry-leading quality standards that meet ISO/TS 16949:2002.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2000 | Ford | Ranger | 4WD | Front | 1st Design; Pulse Vacuum Hub Locks |
| 2000 | Mazda | B3000 | 4WD | Front | 1st Design; Pulse Vacuum Hub Locks |
| 2000 | Mazda | B4000 | 4WD | Front | 1st Design; Pulse Vacuum Hub Locks |
| 1999 | Ford | Ranger | 4WD | Front | — |
| 1999 | Mazda | B3000 | 4WD | Front | — |
| 1999 | Mazda | B4000 | 4WD | Front | — |
| 1998 | Ford | Ranger | 4WD | Front | — |
| 1998 | Mazda | B3000 | 4WD | Front | — |
| 1998 | Mazda | B4000 | 4WD | Front | — |
| No rows match your filter. | |||||