/live/media/PH/PH_29515038_Fro.jpg)
DuraGo 295-15038 Wheel Bearing and Hub Assembly - Front
| Brand | DuraGo 295-15038 |
|---|---|
| Position | Front |
| Spline Quantity | 33 |
| 143 | 139.7 |
| 143 | 5.5 |
| Flange Bolt Hole Quantity | 3 |
| Wheel Stud Size | 1/2-20 |
| Wheel Pilot Diameter | 3.06 |
| Wheel Pilot Diameter | 77.6 |
| Brake Pilot Diameter | 3.09 |
| Brake Pilot Diameter | 78.5 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 3.91 |
| Hub Pilot Diameter | 99.3 |
| Flange Shape | Triangle |
| Flange Bolts Included | No |
| Anti Lock Braking System | No |
| Flange Offset | 2 |
| Flange Offset | 50.8 |
| Flange Diameter | 183 |
| Flange Diameter | 7.2 |
| Driven Or Non-Driven Type Hub Assembly | Driven |
| Flange Bolt Size | M14 x 1.5 |
| Fits | Dodge · 2 vehicles |
Wheel bearing and hub assembly. Complete hub unit for smooth, reliable wheel support.
Driven hub assembly. Built for driven applications with 5 wheel studs included.
100% tested. Each hub assembly is checked to meet strict quality standards.
Cross-references MOOG Hub Assemblies 515038, SKF BR930409 and Timken HA599863 for the same application. See all 7.
DuraGo 295-15038 Front Hub Assembly
The DuraGo 295-15038 wheel bearing and hub assembly is built for front-wheel applications on the 2000-2001 Dodge Ram 1500. It is a driven hub assembly with 5 wheel studs, 33 splines, and a triangle flange design for a direct-fit replacement in the front axle position.
Key Features
- Fits 2000-2001 Dodge Ram 1500, front
- Driven wheel bearing and hub assembly
- 33-spline hub design
- 5 wheel studs with 1/2-20 stud size
- Wheel studs included
- Triangle flange shape with 3 flange bolt holes
- Flange bolt size: M14 x 1.5
- Hub pilot diameter: 99.3 mm (3.91 in.)
- Wheel pilot diameter: 77.6 mm (3.06 in.)
- Brake pilot diameter: 78.5 mm (3.09 in.)
- Flange diameter: 183 mm (7.2 in.)
- Flange offset: 50.8 mm (2 in.)
- ABS: No
Detailed Description
DuraGo 295-15038 is a front driven hub assembly engineered for the 2000-2001 Dodge Ram 1500. It is assembled with quality components and tested to meet DuraGo’s manufacturing standards, with attention to hub fit, bearing performance, and reduced friction at the wheel end. This part cross-references SKF BR930409 for the same application.
For buyers searching for a front wheel bearing and hub assembly for Dodge Ram 1500 2000-2001, this unit provides the key dimensions needed for proper alignment at the hub, brake, and wheel interfaces. The 33-spline configuration, 5-stud pattern, and triangle flange layout make it a direct replacement option for the specified front position.
Common Problems This Part Can Address
- Wheel-end noise from a worn hub or bearing
- Excessive play or looseness at the front wheel
- Uneven hub rotation caused by bearing wear
- Vibration or roughness from a deteriorated front hub assembly
- Fitment issues when replacing a damaged driven hub on a Dodge Ram 1500
Installation Notes and Tips
Confirm the vehicle is a 2000-2001 Dodge Ram 1500 with front driven hub requirements before ordering. Verify spline count, flange bolt pattern, stud size, and pilot diameters against the original part to ensure correct installation. Because this hub assembly does not include ABS, it should be matched only to non-ABS applications listed in the fitment data. Use proper torque procedures and inspect related suspension and brake components during replacement.
Quality Assurance
DuraGo manufactures this hub assembly to industry-leading quality standards and states that its hub assemblies are 100% tested before release. The brand also notes compliance with ISO/TS 16949:2002 manufacturing standards.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2001 | Dodge | Ram 1500 | 4WD | Front | — |
| 2000 | Dodge | Ram 1500 | 4WD | Front | — |
| No rows match your filter. | |||||