/live/media/PH/PH_29541008_Fro.jpg)
DuraGo 295-41008 Wheel Bearing and Hub Assembly - Rear
| Brand | DuraGo 295-41008 |
|---|---|
| Position | Rear |
| Spline Quantity | 33 |
| 143 | 135 |
| 143 | 5.31 |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Size | M14 x 2 |
| Wheel Pilot Diameter | 3.42 |
| Wheel Pilot Diameter | 86.8 |
| Brake Pilot Diameter | 3.54 |
| Brake Pilot Diameter | 90 |
| Wheel Stud Quantity | 6 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 3.91 |
| Hub Pilot Diameter | 99.3 |
| Flange Shape | Modified |
| Flange Bolts Included | No |
| Anti Lock Braking System | Yes |
| Anti Lock Braking System Type | Sensor |
| Connector Quantity | 1 |
| Flange Offset | 2.19 |
| Flange Offset | 55.5 |
| Flange Diameter | 182.8 |
| Flange Diameter | 7.2 |
| ABS Sensor Cord Included | Yes |
| Driven Or Non-Driven Type Hub Assembly | Driven |
| Flange Bolt Size | M14 x 1.5 |
| Fits | Ford and Lincoln · 8 vehicles |
OE-style hub assembly. Built as a driven wheel bearing and hub assembly for straightforward replacement.
ABS sensor included. Integrated sensor support helps maintain anti-lock braking system function.
Wheel studs included. Ready with studs already in place for a cleaner install.
Cross-references MOOG Hub Assemblies 541008, SKF BR930828 and Timken SP550209 for the same application. See all 7.
DuraGo 295-41008 Rear Hub Assembly
The DuraGo 295-41008 wheel bearing and hub assembly is built for rear driveline service on select Ford Expedition and Lincoln Navigator models. It combines the hub, bearing, and ABS sensor components into one replacement unit to help restore smooth wheel rotation and consistent wheel speed signal performance.
Key Features
- Driven rear wheel bearing and hub assembly for select applications
- ABS sensor type design with ABS sensor cord included
- 6 wheel studs with M14 x 2 wheel stud size
- 33 spline count for the driven hub interface
- Modified flange shape with 182.8 mm flange diameter
- Hub pilot diameter: 99.3 mm; wheel pilot diameter: 86.8 mm
- Brake pilot diameter: 90 mm and flange offset: 55.5 mm
- 100% tested during manufacturing to verify unit performance
Detailed Description
DuraGo 295-41008 is a rear wheel bearing and hub assembly engineered for 2007-2010 Ford Expedition and 2007-2010 Lincoln Navigator rear applications. It is a driven hub assembly with ABS sensor integration, making it a direct replacement choice for vehicles that rely on wheel speed input at the rear axle. This part cross-references SKF BR930828 and Timken SP550209 for the same application. The DuraGo 295-41008 is assembled with quality components and manufactured to ISO/TS 16949:2002 standards.
What It Helps Address
- Rear wheel bearing noise or rough rotation
- Excessive hub play or looseness at the wheel end
- ABS warning light concerns related to wheel speed signal issues
- Uneven wheel-end operation caused by a worn hub assembly
- Reduced driveline efficiency from a deteriorated hub bearing
Installation Notes and Tips
Verify rear fitment before installation on 2007-2010 Ford Expedition and 2007-2010 Lincoln Navigator models. Confirm the 33-spline driven hub interface, M14 x 2 wheel studs, 4 flange bolt holes, and ABS sensor connection match the original unit. Inspect the mating surfaces, axle end, and brake components for wear before installing the new hub assembly. Use proper torque procedures and follow the vehicle service manual for final tightening and ABS system checks.
Quality Assurance
DuraGo manufactures this hub assembly to industry-leading quality standards and tests each unit before release. The part is built to meet ISO/TS 16949:2002 quality requirements.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Ford | Expedition | Rear | — |
| 2010 | Lincoln | Navigator | Rear | — |
| 2009 | Ford | Expedition | Rear | — |
| 2009 | Lincoln | Navigator | Rear | — |
| 2008 | Ford | Expedition | Rear | — |
| 2008 | Lincoln | Navigator | Rear | — |
| 2007 | Ford | Expedition | Rear | — |
| 2007 | Lincoln | Navigator | Rear | — |
| No rows match your filter. | ||||