/live/media/PH/PH_29594018_Fro.jpg)
DuraGo 295-94018 Wheel Bearing and Hub Assembly - Rear
| Brand | DuraGo 295-94018 |
|---|---|
| Position | Rear |
| Spline Quantity | 26 |
| 143 | 114.3 |
| 143 | 4.5 |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Wheel Pilot Diameter | 2.36 |
| Wheel Pilot Diameter | 60 |
| Brake Pilot Diameter | 2.44 |
| Brake Pilot Diameter | 62 |
| Wheel Stud Quantity | 5 |
| Wheel Studs Included | Yes |
| Hub Pilot Diameter | 3.31 |
| Hub Pilot Diameter | 84 |
| Flange Shape | Modified |
| Flange Bolts Included | No |
| Anti Lock Braking System | No |
| Flange Bolt Hole Diameter | 0.52 |
| Flange Bolt Hole Diameter | 13.1 |
| Flange Offset | 2.83 |
| Flange Offset | 72 |
| Flange Diameter | 152 |
| Flange Diameter | 5.98 |
| Driven Or Non-Driven Type Hub Assembly | Driven |
| Fits | Toyota · 10 vehicles |
Premium hub assembly. Built with quality components and 100% tested for consistent performance.
Driven hub design. Engineered for driven applications with a modified flange shape.
Wheel studs included. Ready with M12 x 1.5 studs and a 5-stud layout.
Cross-references SKF BR930831, Timken HA590410 and 40044011 for the same application. See all 5.
DuraGo 295-94018 Rear Wheel Hub Assembly
DuraGo 295-94018 is a driven rear wheel bearing and hub assembly for select Toyota Sienna models. It is built with quality components and 100% tested to meet DuraGo’s manufacturing standards, helping restore smooth wheel rotation and consistent driveline performance.
Key Features
- Driven rear wheel bearing and hub assembly
- Fits 2011-2020 Toyota Sienna, rear
- 26-spline hub design
- 5 wheel studs with M12 x 1.5 stud size
- Modified flange shape with 4-bolt flange pattern
- Hub pilot diameter: 84 mm
- Wheel pilot diameter: 60 mm
- Brake pilot diameter: 62 mm
- Flange diameter: 152 mm
- Flange offset: 72 mm
- ABS not included in this application
Detailed Description
This DuraGo wheel bearing and hub assembly, part number 295-94018, is engineered for rear applications on the 2011-2020 Toyota Sienna. As a driven hub assembly, it supports the drivetrain at the rear wheel while providing the bearing support needed for stable rotation and proper wheel mounting. DuraGo assembles these units with high-quality components and tests each hub assembly before release to help maintain consistent fit and function. This part cross-references SKF BR930831 and Timken HA590410 for the same application.
What It Helps Address
- Wheel bearing noise from a worn rear hub assembly
- Excessive play or looseness at the rear wheel
- Uneven wheel rotation caused by hub wear
- Vibration or roughness from a deteriorated bearing surface
- Improper wheel mounting due to damaged hub components
Installation Notes and Tips
Verify rear fitment by year and vehicle configuration before installation. Confirm spline count, stud size, pilot diameters, and flange dimensions against the original part to ensure correct replacement. Because this application does not include ABS, check the vehicle’s rear hub setup before ordering. Professional installation is recommended for proper torque, alignment, and bearing seating.
Quality Assurance
DuraGo manufactures this hub assembly to industry-leading quality standards and states that its hub assemblies meet ISO/TS 16949:2002 requirements. Each unit is 100% tested during production to help ensure it meets DuraGo’s standards for the 295-94018 application.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2020 | Toyota | Sienna | AWD | Rear | — |
| 2019 | Toyota | Sienna | AWD | Rear | — |
| 2018 | Toyota | Sienna | AWD | Rear | — |
| 2017 | Toyota | Sienna | AWD | Rear | — |
| 2016 | Toyota | Sienna | AWD | Rear | — |
| 2015 | Toyota | Sienna | AWD | Rear | — |
| 2014 | Toyota | Sienna | AWD | Rear | — |
| 2013 | Toyota | Sienna | AWD | Rear | — |
| 2012 | Toyota | Sienna | AWD | Rear | — |
| 2011 | Toyota | Sienna | AWD | Rear | — |
| No rows match your filter. | |||||