/live/media/PR/PR_BD35038_Fro.jpg)
DuraGo BD35038 Brake Drum - Rear
| Brand | DuraGo BD35038 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.57 |
| Bolt Hole Diameter | 14.6 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 2.16 |
| Brake Surface Width | 54.8 |
| Center Hole Diameter | 2.45 |
| Center Hole Diameter | 62.2 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 9.31 |
| Maximum Brake Diameter (Discard) | 236.6 |
| Nominal Drum Diameter | 9 |
| Nominal Drum Diameter | 228.6 |
| Outer Cooling Fins | No |
| Outside Diameter | 10.71 |
| Outside Diameter | 272 |
| Overall Height | 2.52 |
| Overall Height | 64.1 |
| Rust Resistant Coating | No |
| Fits | Toyota · 5 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum. Built for consistent stopping power and everyday reliability.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9634, 35038 and 12344036 for the same application. See all 6.
DuraGo BD35038 Rear Brake Drum
The DuraGo BD35038 is a cast iron rear brake drum built for 1996-2000 Toyota RAV4 applications. It is manufactured in ISO-certified factories with attention to fit, form, and function for a direct replacement brake service part.
- Cast iron construction for dependable braking performance
- Full cast design
- Nominal drum diameter: 9 in. (228.6 mm)
- Maximum brake diameter discard: 9.31 in. (236.6 mm)
- Outside diameter: 10.71 in. (272 mm)
- Brake surface width: 2.16 in. (54.8 mm)
- Center hole diameter: 2.45 in. (62.2 mm)
- 5-bolt pattern with 4.5 in. (114.3 mm) bolt circle diameter
- Overall height: 2.52 in. (64.1 mm)
Fitment Details
Fits 1996-2000 Toyota RAV4, rear. This part number, BD35038, is also referenced for the same application under Anchor 9634.
For Toyota RAV4 rear brake drum replacement, BD35038 provides the key dimensions needed for proper drum-to-hub fitment and brake shoe contact. The cast iron construction supports stable braking service, while the listed diameter and surface measurements help match the original brake setup on the rear axle.
Common Brake Drum Replacement Issues
- Brake pulsation or uneven rear braking from worn drum surfaces
- Out-of-spec drum diameter after machining or wear
- Noise from scored or heat-damaged drum surfaces
- Poor brake shoe contact caused by drum distortion
- Rear brake service needs on 1996-2000 Toyota RAV4 models
Installation Notes
Verify drum diameter, bolt pattern, center hole size, and brake surface width before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and confirm the drum does not exceed the maximum brake diameter discard specification. Proper cleaning of the hub and mating surfaces helps ensure correct seating on the vehicle.
Quality Assurance
DuraGo has over 45 years of aftermarket manufacturing experience and supplies brake drums through ISO-certified factories. The brand focuses on catalog coverage and application accuracy for professional brake service, including the BD35038 rear brake drum for Toyota RAV4 fitment.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2000 | Toyota | RAV4 | Rear | — |
| 1999 | Toyota | RAV4 | Rear | — |
| 1998 | Toyota | RAV4 | Rear | — |
| 1997 | Toyota | RAV4 | Rear | — |
| 1996 | Toyota | RAV4 | Rear | — |
| No rows match your filter. | ||||