/live/media/PR/PR_BD35079_Fro.jpg)
DuraGo BD35079 Brake Drum - Rear
| Brand | DuraGo BD35079 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.51 |
| Bolt Hole Diameter | 12.9 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 2.06 |
| Brake Surface Width | 52.4 |
| Center Hole Diameter | 2.52 |
| Center Hole Diameter | 64.1 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 10.04 |
| Maximum Brake Diameter (Discard) | 255 |
| Nominal Drum Diameter | 10 |
| Nominal Drum Diameter | 254 |
| Outer Cooling Fins | No |
| Outside Diameter | 12.34 |
| Outside Diameter | 313.4 |
| Overall Height | 3.07 |
| Overall Height | 78 |
| Rust Resistant Coating | No |
| Fits | Honda · 3 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum design. Built for consistent stopping power and smooth operation.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9674, Four Seasons 35079 and 42610S0XA01 for the same application. See all 8.
DuraGo BD35079 Rear Brake Drum for Honda Odyssey
The DuraGo BD35079 is a cast iron rear brake drum built for 1999-2001 Honda Odyssey applications. It is engineered to match the required fit, form, and function for this vehicle platform, with dimensions that support proper brake shoe contact and drum operation.
Key Features
- Cast iron construction for dependable brake drum performance
- Nominal drum diameter: 10 in. / 254 mm
- Maximum brake diameter (discard): 10.04 in. / 255 mm
- Outside diameter: 12.34 in. / 313.4 mm
- Brake surface width: 2.06 in. / 52.4 mm
- Center hole diameter: 2.52 in. / 64.1 mm
- Bolt circle diameter: 4.5 in. / 114.3 mm
- 5 bolt holes with 0.51 in. / 12.9 mm diameter
- Full cast construction for consistent drum structure
- Rear fitment for 1999-2001 Honda Odyssey
Product Details
DuraGo brake drums are manufactured in ISO-certified factories with attention to fit, form, and function. The BD35079 follows the dimensional requirements needed for rear brake service on the 1999-2001 Honda Odyssey, helping maintain proper shoe-to-drum contact and stable braking performance. This part cross-references Four Seasons 35079 for the same application.
Common Brake Drum Issues This Part Addresses
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking consistency from excessive drum diameter
- Brake shoe contact problems from worn drum surfaces
- Noise or vibration related to damaged cast iron drum surfaces
- Service replacement needs on 1999-2001 Honda Odyssey rear brakes
Installation Notes
Verify drum diameter, bolt pattern, and center bore before installation. Inspect brake shoes, wheel cylinders, and related rear brake components for wear or damage during service. Measure the drum against the discard specification of 10.04 in. / 255 mm and replace if the braking surface exceeds that limit.
Quality Assurance
DuraGo has over 45 years of aftermarket manufacturing experience, and its brake drum program is built for professional repair use. The BD35079 is produced by ISO-certified factories to meet fit, form, and function requirements for the listed Honda Odyssey rear brake application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Honda | Odyssey | Rear | — |
| 2000 | Honda | Odyssey | Rear | — |
| 1999 | Honda | Odyssey | Rear | — |
| No rows match your filter. | ||||