/live/media/PR/PR_BD35090_Fro.jpg)
DuraGo BD35090 Brake Drum - Rear
| Brand | DuraGo BD35090 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 5.5 |
| Bolt Circle Diameter | 139.7 |
| Bolt Hole Diameter | 0.57 |
| Bolt Hole Diameter | 14.5 |
| Bolt Hole Quantity | 6 |
| Brake Surface Width | 2.6 |
| Brake Surface Width | 66 |
| Center Hole Diameter | 4.17 |
| Center Hole Diameter | 106 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 11.69 |
| Maximum Brake Diameter (Discard) | 297 |
| Nominal Drum Diameter | 11.61 |
| Nominal Drum Diameter | 295 |
| Outer Cooling Fins | No |
| Outside Diameter | 13.5 |
| Outside Diameter | 343 |
| Overall Height | 3.28 |
| Overall Height | 83.4 |
| Rust Resistant Coating | No |
| Fits | Toyota · 5 vehicles |
Cast iron construction. Full-cast drum for dependable braking performance.
OE fit and function. Manufactured to meet fit, form, and function requirements.
Professional-grade program. Backed by DuraGo’s long-running aftermarket brake line.
Cross-references Anchor 9732, Anchor 9797 and FEL-PRO 35090 for the same application. See all 11.
DuraGo BD35090 Rear Brake Drum
The DuraGo BD35090 is a rear brake drum built from full cast iron for consistent braking performance and durability. It is a direct-fit option for select Toyota truck applications, including 2003-2006 Toyota Tundra rear and 2004 Toyota Tacoma rear 6 lug.
Key Features
- Cast iron construction with a full cast design
- Nominal drum diameter: 11.61 in. (295 mm)
- Maximum brake diameter discard: 11.69 in. (297 mm)
- Brake surface width: 2.6 in. (66 mm)
- Outside diameter: 13.5 in. (343 mm)
- Bolt pattern: 6 bolt holes with 5.5 in. (139.7 mm) bolt circle diameter
- Center hole diameter: 4.17 in. (106 mm)
- Overall height: 3.28 in. (83.4 mm)
- Fits rear brake applications on select Toyota Tundra and Toyota Tacoma models
Detailed Description
Part number BD35090 is engineered as a rear brake drum for select Toyota truck fitments. Its cast iron, full cast construction supports stable braking surfaces and dimensional consistency, while the listed drum and surface measurements help confirm proper fit during brake service. This drum is a practical replacement when servicing rear drum brake systems on 2003-2006 Toyota Tundra and 2004 Toyota Tacoma 6 lug applications. DuraGo manufactures brake drums through ISO certified factories and focuses on fit, form, and function for aftermarket brake service.
This part cross-references FEL-PRO 35090 for the same application.
What It Helps Address
- Rear brake drum wear from normal mileage and heat cycling
- Brake pulsation caused by an out-of-spec drum surface
- Reduced braking consistency from drum diameter growth beyond discard limits
- Service issues on Toyota Tundra rear brake repairs
- Service issues on Toyota Tacoma rear 6 lug brake maintenance
Installation Notes and Tips
Verify the rear drum dimensions, bolt pattern, and center hole diameter before installation. Confirm the vehicle is a 2003-2006 Toyota Tundra rear or a 2004 Toyota Tacoma rear 6 lug application. Inspect shoes, hardware, and wheel cylinders during brake service, and measure the existing drum against the discard specification before reuse or replacement.
Quality Assurance
DuraGo brake drums are produced by ISO certified factories and built to meet fit, form, and function requirements for aftermarket brake service. The BD35090 is manufactured with attention to dimensional accuracy and application-specific cataloging for professional repair use.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Toyota | Tundra | Rear | — |
| 2005 | Toyota | Tundra | Rear | — |
| 2004 | Toyota | Tacoma | Rear | 6 Lug |
| 2004 | Toyota | Tundra | Rear | — |
| 2003 | Toyota | Tundra | Rear | — |
| No rows match your filter. | ||||