/live/media/PR/PR_BD35095_Fro.jpg)
DuraGo BD35095 Brake Drum - Rear
| Brand | DuraGo BD35095 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.5 |
| Bolt Hole Diameter | 12.8 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 2.16 |
| Brake Surface Width | 54.8 |
| Center Hole Diameter | 2.99 |
| Center Hole Diameter | 76 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 9.08 |
| Maximum Brake Diameter (Discard) | 230.6 |
| Nominal Drum Diameter | 9 |
| Nominal Drum Diameter | 228.5 |
| Outer Cooling Fins | No |
| Outside Diameter | 10.7 |
| Outside Diameter | 271.7 |
| Overall Height | 2.49 |
| Overall Height | 63.25 |
| Rust Resistant Coating | No |
| Fits | Kia and Hyundai · 10 vehicles |
Full cast construction. Cast iron drum built for dependable braking performance.
Professional-grade quality. Manufactured in ISO-certified factories to meet fit, form, and function requirements.
Brake drum. A core braking component for consistent stopping power.
Cross-references Anchor 9722, 35095 and 126164 for the same application. See all 7.
DuraGo BD35095 Rear Brake Drum
The DuraGo BD35095 is a rear brake drum built from cast iron for select Hyundai Sonata and Kia Magentis and Optima applications. It is sized to match the specified drum dimensions and brake surface requirements for a direct-fit rear brake service.
Key Features
- Cast iron construction for dependable braking performance
- Full cast design
- Nominal drum diameter: 9 in. (228.5 mm)
- Maximum brake diameter discard: 9.08 in. (230.6 mm)
- Outside diameter: 10.7 in. (271.7 mm)
- Brake surface width: 2.16 in. (54.8 mm)
- Center hole diameter: 2.99 in. (76 mm)
- 4-bolt pattern with 4.5 in. bolt circle diameter
- Overall height: 2.49 in. (63.25 mm)
Detailed Description
Built for rear brake service, the DuraGo BD35095 brake drum is engineered to meet fit, form, and function requirements for the listed vehicles. It is a cast iron, full cast drum with a 4-bolt, 4.5-inch bolt circle layout and the dimensions needed for rear drum brake replacement on 1999-2002 Hyundai Sonata, 2001-2004 Kia Magentis, and 2001-2002 Kia Optima applications. DuraGo manufactures its brake drum and rotor program through ISO-certified factories and focuses on catalog coverage and application accuracy for professional repair work. This part number, BD35095, is also referenced in aftermarket interchange listings for the same application.
Common Problems This Part Helps Address
- Rear brake drum wear beyond discard diameter
- Brake pulsation or uneven rear braking from drum surface damage
- Out-of-round or scored drum surfaces
- Reduced braking consistency during rear brake service
- Replacement needs after corrosion or heat-related drum damage
Installation Notes and Tips
Verify drum diameter, bolt pattern, center hole diameter, and brake surface width before installation. Inspect rear shoes, wheel cylinders, and hardware condition during service, and confirm the drum meets the vehicle’s discard specification before reuse or replacement. For fitment reference, this part fits 1999-2002 Hyundai Sonata, rear; fits 2001-2004 Kia Magentis, rear; and fits 2001-2002 Kia Optima, rear.
Quality Assurance
DuraGo brake drums are produced by ISO-certified factories and are built to meet application requirements for fit, form, and function. The brand has over 45 years of aftermarket manufacturing experience and supports professional brake service with application-focused cataloging.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Kia | Magentis | Rear | — |
| 2003 | Kia | Magentis | Rear | — |
| 2002 | Hyundai | Sonata | Rear | — |
| 2002 | Kia | Magentis | Rear | — |
| 2002 | Kia | Optima | Rear | — |
| 2001 | Hyundai | Sonata | Rear | — |
| 2001 | Kia | Magentis | Rear | — |
| 2001 | Kia | Optima | Rear | — |
| 2000 | Hyundai | Sonata | Rear | — |
| 1999 | Hyundai | Sonata | Rear | — |
| No rows match your filter. | ||||