/live/media/PR/PR_BD35103_Fro.jpg)
DuraGo BD35103 Brake Drum - Rear
| Brand | DuraGo BD35103 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.5 |
| Bolt Hole Diameter | 12.8 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 1.75 |
| Brake Surface Width | 44.5 |
| Center Hole Diameter | 2.53 |
| Center Hole Diameter | 64.2 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 8.7 |
| Maximum Brake Diameter (Discard) | 221 |
| Nominal Drum Diameter | 8.66 |
| Nominal Drum Diameter | 220 |
| Outer Cooling Fins | No |
| Outside Diameter | 10.56 |
| Outside Diameter | 268.3 |
| Overall Height | 2.38 |
| Overall Height | 60.4 |
| Rust Resistant Coating | No |
| Fits | Honda · 10 vehicles |
Cast iron construction. Delivers durable braking performance with a full-cast drum design.
Brake drum design. Built for dependable stopping power and consistent surface contact.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9750, Four Seasons 35103 and 126210 for the same application. See all 6.
DuraGo BD35103 Rear Brake Drum
The DuraGo BD35103 is a cast iron rear brake drum built for 2003-2007 Honda Accord applications. It is sized to match the listed drum dimensions and brake surface specifications for a direct-fit rear brake service on the Accord platform.
Key Features
- Cast iron construction for stable braking performance
- Full cast drum design
- Nominal drum diameter: 8.66 in. (220 mm)
- Maximum brake diameter discard: 8.7 in. (221 mm)
- Outside diameter: 10.56 in. (268.3 mm)
- Brake surface width: 1.75 in. (44.5 mm)
- Bolt circle diameter: 4.5 in. (114.3 mm)
- 5-bolt hole pattern with 0.5 in. (12.8 mm) bolt holes
- Center hole diameter: 2.53 in. (64.2 mm)
- Overall height: 2.38 in. (60.4 mm)
Product Details
DuraGo BD35103 is part of DuraGo’s brake drum and rotor program, built by ISO-certified factories with attention to fit, form, and function. This rear brake drum is specified for 2003-2007 Honda Accord rear brake service and uses cast iron construction to support consistent drum brake operation. The listed dimensions, including the 8.66-inch nominal drum diameter and 1.75-inch brake surface width, help match the original brake geometry for the application.
This part cross-references Four Seasons 35103 for the same application.
What It Helps Address
- Rear brake pulsation caused by worn drum surfaces
- Brake shoe contact issues from out-of-spec drum diameter
- Reduced braking consistency on a 2003-2007 Honda Accord rear axle
- Noise or vibration related to drum wear
- Service replacement needs for a worn cast iron brake drum
Installation Notes and Tips
Verify drum diameter, bolt circle, center hole, and brake surface width before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and measure the existing drum against the discard specification of 8.7 in. (221 mm). For best results, clean the braking surface before assembly and confirm proper rear brake adjustment after installation.
Quality Assurance
DuraGo manufactures this brake drum through ISO-certified factories and builds the program around fit, form, and function requirements for aftermarket brake service. The BD35103 is engineered for the listed Honda Accord rear fitment and dimensional specifications.
| Year | Make | Model | Submodel | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|
| 2007 | Honda | Accord | LX | GAS | Rear | — |
| 2007 | Honda | Accord | Value Package | GAS | Rear | — |
| 2006 | Honda | Accord | LX | GAS | Rear | — |
| 2006 | Honda | Accord | Value Package | GAS | Rear | — |
| 2006 | Honda | Accord | LX Special Edition | GAS | Rear | — |
| 2005 | Honda | Accord | SE | — | Rear | — |
| 2005 | Honda | Accord | LX | — | Rear | — |
| 2005 | Honda | Accord | DX | — | Rear | — |
| 2004 | Honda | Accord | — | — | Rear | — |
| 2003 | Honda | Accord | — | — | Rear | — |
| No rows match your filter. | ||||||