/live/media/PR/PR_BD35112_Fro.jpg)
DuraGo BD35112 Brake Drum - Rear
| Brand | DuraGo BD35112 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 3.94 |
| Bolt Circle Diameter | 100 |
| Bolt Hole Diameter | 0.5 |
| Bolt Hole Diameter | 12.6 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 1.35 |
| Brake Surface Width | 34.2 |
| Center Hole Diameter | 1.46 |
| Center Hole Diameter | 37 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 7.93 |
| Maximum Brake Diameter (Discard) | 201.5 |
| Nominal Drum Diameter | 7.87 |
| Nominal Drum Diameter | 199.8 |
| Outer Cooling Fins | No |
| Outside Diameter | 9.07 |
| Outside Diameter | 230.5 |
| Overall Height | 2.67 |
| Overall Height | 67.8 |
| Rust Resistant Coating | No |
| Fits | Kia · 3 vehicles |
Cast iron construction. Full-cast drum delivers dependable braking performance.
Precision fit and form. Manufactured in ISO-certified factories to meet function requirements.
Brake drum design. Built for the brake drum and rotor program with professional-grade cataloging.
Cross-references Anchor 9773, Four Seasons 35112 and 12350006 for the same application. See all 6.
DuraGo BD35112 Rear Brake Drum
The DuraGo BD35112 is a cast iron rear brake drum built for 2003-2005 Kia Rio applications. It is engineered to match the required fit, form, and function for this rear brake service part, with dimensions that support proper drum brake operation.
Key Features
- Cast iron construction for durable brake service performance
- Full cast design
- Nominal drum diameter: 199.8 mm (7.87 in.)
- Maximum brake diameter discard: 201.5 mm (7.93 in.)
- Outside diameter: 230.5 mm (9.07 in.)
- Brake surface width: 34.2 mm (1.35 in.)
- Bolt circle diameter: 100 mm (3.94 in.)
- 4-bolt hole pattern with 12.6 mm (0.5 in.) bolt holes
- Center hole diameter: 37 mm (1.46 in.)
- Overall height: 67.8 mm (2.67 in.)
Detailed Description
DuraGo BD35112 is a rear brake drum for 2003, 2004, and 2005 Kia Rio models. The drum is manufactured in ISO-certified factories and reflects DuraGo’s focus on catalog coverage and dimensional accuracy for aftermarket brake service. Its cast iron, full cast construction supports consistent braking surface contact, while the listed drum and discard dimensions help confirm proper replacement selection for the rear brake system. This part cross-references Anchor 9773 for the same application.
Common Repair Uses
- Restoring rear drum brake performance on a Kia Rio
- Replacing a worn or out-of-spec brake drum
- Addressing brake pulsation or uneven rear braking caused by drum wear
- Correcting noise from a damaged or scored drum surface
- Supporting proper rear brake shoe contact and braking balance
Installation Notes and Tips
Verify drum diameter, bolt pattern, center hole diameter, and brake surface width before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and measure the existing drum against the discard specification to confirm replacement is needed. For fitment reference, this part fits 2003-2005 Kia Rio, rear.
Quality Assurance
DuraGo manufactures this brake drum through ISO-certified factories and builds the product to meet fit, form, and function requirements for the listed application. Part number BD35112 is also referenced in aftermarket catalogs under related numbers for the same vehicle coverage.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2005 | Kia | Rio | Rear | — |
| 2004 | Kia | Rio | Rear | — |
| 2003 | Kia | Rio | Rear | — |
| No rows match your filter. | ||||