/live/media/PR/PR_BD3532_Fro.jpg)
DuraGo BD3532 Brake Drum - Rear
| Brand | DuraGo BD3532 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 6.06 |
| Bolt Circle Diameter | 154 |
| Bolt Hole Diameter | 0.41 |
| Bolt Hole Diameter | 10.4 |
| Bolt Hole Quantity | 6 |
| Brake Surface Width | 2.99 |
| Brake Surface Width | 76 |
| Center Hole Diameter | 4.49 |
| Center Hole Diameter | 114 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 10.08 |
| Maximum Brake Diameter (Discard) | 256 |
| Nominal Drum Diameter | 10 |
| Nominal Drum Diameter | 254 |
| Outer Cooling Fins | No |
| Outside Diameter | 11.88 |
| Outside Diameter | 301.8 |
| Overall Height | 3.41 |
| Overall Height | 86.7 |
| Rust Resistant Coating | No |
| Fits | Toyota · 9 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum. Built for consistent stopping power and smooth operation.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 3532, Anchor 9353 and 60842 for the same application. See all 8.
DuraGo BD3532 Rear Brake Drum
The DuraGo BD3532 is a cast iron rear brake drum built for specific Toyota Pickup DRW applications. It is a full cast design with a 10 in nominal drum diameter, 11.88 in outside diameter, and 2.99 in brake surface width for the rear brake system.
Fits 1989-1993 Toyota Pickup, rear, DRW; 1 TON. Fits 1988 Toyota Pickup, rear, disc brake rotor and hub assembly fits DRW applications. This part cross-references Anchor 3532 and 9353 for the same application.
Key Features
- Cast iron construction for brake drum durability
- Full cast design
- Nominal drum diameter: 10 in (254 mm)
- Maximum brake diameter discard: 10.08 in (256 mm)
- Brake surface width: 2.99 in (76 mm)
- Outside diameter: 11.88 in (301.8 mm)
- Bolt hole quantity: 6
- Bolt circle diameter: 6.06 in (154 mm)
- Center hole diameter: 4.49 in (114 mm)
- Overall height: 3.41 in (86.7 mm)
Detailed Description
DuraGo BD3532 is engineered as a rear brake drum for Toyota Pickup dual rear wheel and 1-ton configurations listed in the fitment data. The cast iron, full cast construction supports stable braking performance, while the dimensional specs help match the original brake setup on the rear axle. DuraGo manufactures brake drums and rotors in ISO-certified factories and focuses on fit, form, and function for aftermarket replacement parts. For Toyota Pickup owners searching for a rear brake drum, BD3532 provides a direct replacement option for the specified 1988-1993 applications.
What It Helps Address
- Rear brake drum wear beyond discard diameter
- Brake pulsation caused by drum surface irregularity
- Reduced braking consistency from an out-of-spec drum
- Noise related to worn rear drum surfaces
- Service replacement for Toyota Pickup rear drum applications
Installation Notes and Tips
Verify drum diameter, bolt pattern, center hole diameter, and brake surface width against the existing part before installation. Clean the hub and inspect rear brake shoes, wheel cylinders, and related hardware for wear before installing the new drum. Confirm the vehicle configuration matches the listed Toyota Pickup DRW and 1-ton rear applications, including the 1988 disc brake rotor and hub assembly note.
Quality Assurance
DuraGo backs this brake drum with manufacturing from ISO-certified factories and a product program focused on catalog accuracy and application coverage. The brand has over 45 years of aftermarket manufacturing experience, with attention to fit, form, and function for brake components.
| Year | Make | Model | Submodel | Body Type | # Doors | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 1993 | Toyota | Pickup | Base | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1992 | Toyota | Pickup | Base | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1991 | Toyota | Pickup | Base | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1990 | Toyota | Pickup | Base | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1990 | Toyota | Pickup | DLX | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1989 | Toyota | Pickup | Base | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1989 | Toyota | Pickup | DLX | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1989 | Toyota | Pickup | SR5 | Cab & Chassis | 2 Door | RWD | Rear | DRW; 1 TON; |
| 1988 | Toyota | Pickup | SR5 | — | — | — | Rear | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| No rows match your filter. | ||||||||