/live/media/PR/PR_BD80011_Fro.jpg)
DuraGo BD80011 Brake Drum - Rear
| Brand | DuraGo BD80011 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.25 |
| Bolt Circle Diameter | 108 |
| Bolt Hole Diameter | 0.61 |
| Bolt Hole Diameter | 15.5 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 2.49 |
| Brake Surface Width | 63.3 |
| Center Hole Diameter | 2.54 |
| Center Hole Diameter | 64.5 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 9.9 |
| Maximum Brake Diameter (Discard) | 251.5 |
| Nominal Drum Diameter | 9.84 |
| Nominal Drum Diameter | 250 |
| Outer Cooling Fins | Yes |
| Outside Diameter | 11.57 |
| Outside Diameter | 294 |
| Overall Height | 3 |
| Overall Height | 76.3 |
| Rust Resistant Coating | No |
| Fits | Ford · 9 vehicles |
Full cast construction. Cast iron drum delivers dependable braking performance.
Cooling fins included. Outer fins help dissipate heat during repeated stops.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Dayco 80011, Gates 9570 and 125403 for the same application. See all 9.
DuraGo BD80011 Rear Brake Drum for Windstar
The DuraGo BD80011 is a cast iron rear brake drum built for 1995-2003 Ford Windstar applications. It uses a full cast construction with outer cooling fins to support consistent braking performance and heat management in everyday driving.
Key Features
- Cast iron construction with full cast design
- Outer cooling fins for improved heat dissipation
- Nominal drum diameter: 250 mm (9.84 in.)
- Outside diameter: 294 mm (11.57 in.)
- Brake surface width: 63.3 mm (2.49 in.)
- Center hole diameter: 64.5 mm (2.54 in.)
- 5-bolt wheel pattern with 108 mm (4.25 in.) bolt circle diameter
- Brake drum part number BD80011 for rear Ford Windstar fitment
Detailed Description
Built by DuraGo, a long-established aftermarket brake manufacturer, this rear brake drum is produced in ISO-certified factories to meet fit, form, and function requirements. The BD80011 is engineered for 1995-2003 Ford Windstar rear brake service and is a direct replacement option for drivers and technicians looking for a drum with the correct dimensions and mounting pattern. This part cross-references Dayco 80011 and Gates 9570 for the same application.
What It Helps Address
- Rear brake pulsation caused by worn or out-of-round drums
- Reduced braking consistency from heat-affected drum surfaces
- Noise from damaged or uneven brake drum contact areas
- Service issues related to incorrect drum diameter or bolt pattern
- Brake maintenance on Ford Windstar rear drum brake systems
Installation Notes and Tips
Verify drum diameter, bolt circle, and center hole dimensions before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and confirm the drum surface is clean and free of contamination before assembly. For best results, compare the existing drum to the BD80011 and confirm rear fitment on the vehicle.
Quality Assurance
DuraGo manufactures this brake drum in ISO-certified factories and backs its brake program with a focus on catalog accuracy and dimensional consistency. The BD80011 is built to meet the requirements of fit, form, and function for rear Ford Windstar brake service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2003 | Ford | Windstar | Rear | — |
| 2002 | Ford | Windstar | Rear | — |
| 2001 | Ford | Windstar | Rear | — |
| 2000 | Ford | Windstar | Rear | — |
| 1999 | Ford | Windstar | Rear | — |
| 1998 | Ford | Windstar | Rear | — |
| 1997 | Ford | Windstar | Rear | — |
| 1996 | Ford | Windstar | Rear | — |
| 1995 | Ford | Windstar | Rear | — |
| No rows match your filter. | ||||