/live/media/PR/PR_BD80087_Fro.jpg)
DuraGo BD80087 Brake Drum - Rear
| Brand | DuraGo BD80087 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 6.5 |
| Bolt Circle Diameter | 165.1 |
| Bolt Hole Diameter | 0.66 |
| Bolt Hole Diameter | 16.8 |
| Bolt Hole Quantity | 8 |
| Brake Surface Width | 4.06 |
| Brake Surface Width | 103 |
| Center Hole Diameter | 4.84 |
| Center Hole Diameter | 123 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 12.2 |
| Maximum Brake Diameter (Discard) | 310 |
| Nominal Drum Diameter | 12.13 |
| Nominal Drum Diameter | 308 |
| Outer Cooling Fins | No |
| Outside Diameter | 14.16 |
| Outside Diameter | 359.7 |
| Overall Height | 6.3 |
| Overall Height | 160 |
| Rust Resistant Coating | No |
| Fits | Dodge · 2 vehicles |
Cast iron construction. Full-cast drum for dependable braking performance.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Professional-grade program. Part of DuraGo's brake drum and rotor lineup.
Cross-references Anchor 9696, Edelmann 80087 and 125748 for the same application. See all 7.
DuraGo BD80087 Rear Brake Drum
The DuraGo BD80087 brake drum is built for rear brake service on select Dodge Ram 2500 applications. Made from cast iron with a full cast construction, it is specified for consistent brake surface geometry and dependable fitment on the listed vehicles.
Key Features
- Cast iron brake drum for rear brake replacement
- Full cast construction
- Nominal drum diameter: 12.13 in. (308 mm)
- Maximum brake diameter discard: 12.2 in. (310 mm)
- Outside diameter: 14.16 in. (359.7 mm)
- Brake surface width: 4.06 in. (103 mm)
- Center hole diameter: 4.84 in. (123 mm)
- Bolt circle diameter: 6.5 in. (165.1 mm)
- 8 bolt holes with 0.66 in. (16.8 mm) bolt hole diameter
- Overall height: 6.3 in. (160 mm)
Detailed Description
DuraGo BD80087 is a rear brake drum engineered for 2000-2001 Dodge Ram 2500 applications. The cast iron design supports stable braking performance, while the listed dimensions help confirm proper drum-to-hub and shoe contact geometry during brake service. DuraGo manufactures its brake drum and rotor programs in ISO-certified factories, with attention to fit, form, and function for aftermarket replacement needs. This part cross-references Anchor 9696 for the same application.
Common Brake Issues This Drum Can Address
- Rear brake drum wear beyond the maximum discard diameter
- Brake pulsation or uneven rear braking caused by drum surface wear
- Reduced braking consistency from out-of-spec drum dimensions
- Noise during rear brake operation when the drum surface is no longer true
- Service replacement for a worn rear drum on a Dodge Ram 2500
Installation Notes and Tips
Verify drum diameter, bolt circle, center hole, and brake surface width against the existing part before installation. For 2000 Dodge Ram 2500 rear brake service, factory TSB 05-04-00 should be reviewed if a high-pitched squeal is present during brake application. Confirm the brake shoes, hardware condition, and hub surfaces are within specification before returning the vehicle to service.
Quality Assurance
DuraGo brake drums are produced in ISO-certified factories and are cataloged for professional aftermarket use. The brand’s brake drum and rotor program is built around fitment accuracy and dimensional consistency for the listed applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Dodge | Ram 2500 | Rear | — |
| 2000 | Dodge | Ram 2500 | Rear | If a high pitched squeal comes from the rear brakes when the brakes are applied refer to factory TSB 05-04-00 |
| No rows match your filter. | ||||