/live/media/PR/PR_BD80088_Fro.jpg)
DuraGo BD80088 Brake Drum - Rear
| Brand | DuraGo BD80088 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 6.5 |
| Bolt Circle Diameter | 165.1 |
| Bolt Hole Diameter | 0.66 |
| Bolt Hole Diameter | 16.7 |
| Bolt Hole Quantity | 8 |
| Brake Surface Width | 4.06 |
| Brake Surface Width | 103 |
| Center Hole Diameter | 4.84 |
| Center Hole Diameter | 123 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 12.2 |
| Maximum Brake Diameter (Discard) | 310 |
| Nominal Drum Diameter | 12.13 |
| Nominal Drum Diameter | 308 |
| Outer Cooling Fins | No |
| Outside Diameter | 14.19 |
| Outside Diameter | 360.4 |
| Overall Height | 9.07 |
| Overall Height | 230.5 |
| Rust Resistant Coating | No |
| Fits | Dodge · 2 vehicles |
Full cast construction. Delivers a solid brake drum design for dependable braking performance.
Cast iron material. Provides the strength and heat handling expected in a brake drum.
ISO-certified manufacturing. Built in certified factories to meet fit, form, and function requirements.
Cross-references Anchor 9697, Dayco 80088 and 125757 for the same application. See all 8.
DuraGo BD80088 Rear Brake Drum
The DuraGo BD80088 is a cast iron brake drum built for rear brake service on select heavy-duty applications. It is engineered to match fit, form, and function requirements for 2000-2001 Dodge Ram 3500 rear brake drum replacement work.
- Cast iron construction for durable braking performance
- Full cast design
- Nominal drum diameter: 12.13 in. / 308 mm
- Maximum brake diameter discard: 12.2 in. / 310 mm
- Outside diameter: 14.19 in. / 360.4 mm
- Brake surface width: 4.06 in. / 103 mm
- Overall height: 9.07 in. / 230.5 mm
- 8 bolt holes with 6.5 in. / 165.1 mm bolt circle diameter
- Center hole diameter: 4.84 in. / 123 mm
Fitment and Application
Compatible with 2000-2001 Dodge Ram 3500, rear. This part number, BD80088, is a direct fitment reference for rear brake drum replacement on those model years. It also cross-references Dayco 80088 for the same application.
Detailed Product Overview
DuraGo has spent more than 45 years developing aftermarket brake components, and this brake drum reflects that catalog-focused approach. The BD80088 is manufactured in ISO-certified factories and built to meet fit, form, and function requirements for service replacement. Key dimensions such as the 12.13-inch nominal drum diameter, 4.06-inch brake surface width, and 8-hole mounting pattern help support accurate installation on the specified Dodge Ram 3500 rear axle application.
Common Brake Drum Replacement Issues
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking consistency from excessive drum diameter wear
- Noise from scored or heat-damaged brake surfaces
- Service failures related to incorrect drum dimensions or bolt pattern mismatch
- Brake performance loss on high-load rear brake applications
Installation Notes and Quality Assurance
Verify drum diameter, bolt circle, center hole, and overall height against the existing part before installation. Inspect rear brake shoes, hardware, and wheel-end components for wear so the new drum can seat correctly. The BD80088 is produced by DuraGo in ISO-certified factories to support consistent quality control and dimensional accuracy. Part number BD80088 is also listed under common interchange references for this application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Dodge | Ram 3500 | Rear | — |
| 2000 | Dodge | Ram 3500 | Rear | — |
| No rows match your filter. | ||||