DuraGo BD80089 Brake Drum - Rear

DuraGo BD80089 Rear Brake Drum

The DuraGo BD80089 brake drum is built for rear brake service on select Saturn L-Series applications. It combines a cast iron and steel top construction with OE-style dimensions to support proper brake surface contact and drum fitment.

For drivers searching for a rear brake drum for 2000-2003 Saturn LS, LS1, LS2, LW1, L100, L200, or LW200, this part number BD80089 provides a direct replacement option with the dimensions needed for the listed applications.

Key Features

• Cast iron / steel top construction
• Nominal drum diameter: 230 mm (9.06 in.)
• Maximum brake diameter discard: 231 mm (9.09 in.)
• Outside diameter: 265.5 mm (10.45 in.)
• Brake surface width: 49.1 mm (1.93 in.)
• Bolt pattern: 5-lug, 110 mm bolt circle diameter (4.33 in.)
• Center hole diameter: 65.7 mm (2.59 in.)
• Overall height: 67 mm (2.64 in.)
• Construction: composite

Detailed Description

DuraGo manufactures aftermarket brake components with attention to fit, form, and function, using ISO-certified factories to support consistent production standards. The BD80089 rear brake drum is cataloged for select Saturn rear brake applications and is sized to match the listed drum diameter, bolt circle, center bore, and overall height requirements.

This brake drum is a practical choice for rear brake service on 2000 Saturn LS, 2000 Saturn LS1, 2000 Saturn LS2, 2000 Saturn LW1, 2001-2003 Saturn L100, 2001-2003 Saturn L200, and 2001-2003 Saturn LW200. If you are replacing a worn rear drum on a Saturn L200 or Saturn LW200, the BD80089 part number helps narrow the search to the correct application.

This part cross-references Anchor 9698 for the same application.

What This Brake Drum Helps Address

• Rear brake pulsation caused by drum wear or out-of-round condition
• Reduced braking consistency from a worn braking surface
• Noise from a damaged or heat-affected rear drum
• Fitment issues when replacing the rear drum on listed Saturn models
• Service needs tied to rear brake drum replacement on Saturn LS, LS1, LS2, LW1, L100, L200, and LW200

Installation Notes and Tips

Confirm the drum diameter, bolt circle, center hole, and brake surface width against the removed part before installation. Inspect rear brake shoes, hardware, and wheel bearings during service, and verify the drum seats fully on the hub before road testing. For Saturn LS, LS1, LS2, LW1, L100, L200, and LW200 rear brake work, matching the listed dimensions is essential for proper operation.

Quality Assurance

DuraGo brake drums are produced in ISO-certified factories and built to meet requirements for fit, form, and function. The BD80089 is part of DuraGo’s brake drum and rotor program, which is cataloged for professional repair applications and supported by the brand’s long aftermarket manufacturing history.