/live/media/PR/PR_BD80093_Fro.jpg)
DuraGo BD80093 Brake Drum - Rear
| Brand | DuraGo BD80093 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.5 |
| Bolt Hole Diameter | 12.7 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 1.67 |
| Brake Surface Width | 42.4 |
| Center Hole Diameter | 2.68 |
| Center Hole Diameter | 68.1 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 8.05 |
| Maximum Brake Diameter (Discard) | 204.5 |
| Nominal Drum Diameter | 8 |
| Nominal Drum Diameter | 203.2 |
| Outer Cooling Fins | No |
| Outside Diameter | 9.3 |
| Outside Diameter | 236.2 |
| Overall Height | 2.62 |
| Overall Height | 66.6 |
| Rust Resistant Coating | No |
| Fits | Nissan · 7 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum. Built for smooth, consistent stopping power.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9706, Edelmann 80093 and 125795 for the same application. See all 9.
DuraGo BD80093 Rear Brake Drum
The DuraGo BD80093 is a cast iron rear brake drum built for consistent braking performance and accurate fitment. It is compatible with 2000-2006 Nissan Sentra rear applications and matches the 8-inch nominal drum size used in this vehicle range.
Key Features
- Cast iron construction for dependable braking surface strength
- Full cast drum design
- 8.05 in. maximum brake diameter discard measurement
- 8 in. nominal drum diameter
- 9.3 in. outside diameter with 1.67 in. brake surface width
- 4-bolt pattern with 4.5 in. bolt circle diameter
- 2.68 in. center hole diameter and 2.62 in. overall height
- No ABS tone ring, outer cooling fins, or rust-resistant coating
Detailed Description
DuraGo BD80093 is a rear brake drum engineered for direct replacement service on 2000-2006 Nissan Sentra models. The cast iron, full cast construction supports stable braking contact, while the dimensional specs help maintain proper drum-to-shoe geometry during service. DuraGo manufactures its brake drum and rotor program in ISO-certified factories, with attention to fit, form, and function for professional repair work. This part cross-references Anchor 9706 for the same application.
What This Brake Drum Helps Address
- Rear brake pulsation caused by worn drum surfaces
- Reduced braking consistency from out-of-spec drum diameter
- Noise from uneven rear brake contact surfaces
- Brake shoe wear related to drum surface condition
- Service replacement needs on 2000-2006 Nissan Sentra rear brake systems
Installation Notes and Tips
Verify the drum diameter, bolt pattern, and center hole dimensions before installation. Measure the existing drum against the 8.05 in. discard specification to confirm replacement is needed. Clean the hub mounting surface and inspect rear brake shoes, wheel cylinders, and hardware condition during service. Fits 2000-2006 Nissan Sentra, rear. Fits 2000-2006 Nissan Sentra rear brake applications and should be matched to the vehicle’s rear drum brake setup before installation.
Quality Assurance
DuraGo brake drums are produced by ISO-certified factories and built to meet fit, form, and function requirements for aftermarket brake service. Part number BD80093 is part of DuraGo’s professional brake drum and rotor program.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2006 | Nissan | Sentra | 1.8L | L4 | Rear | — |
| 2005 | Nissan | Sentra | 1.8L | L4 | Rear | — |
| 2004 | Nissan | Sentra | 1.8L | L4 | Rear | — |
| 2003 | Nissan | Sentra | — | — | Rear | — |
| 2002 | Nissan | Sentra | — | — | Rear | — |
| 2001 | Nissan | Sentra | — | — | Rear | — |
| 2000 | Nissan | Sentra | — | — | Rear | — |
| No rows match your filter. | ||||||