/live/media/PR/PR_BD80096_Fro.jpg)
DuraGo BD80096 Brake Drum - Rear
| Brand | DuraGo BD80096 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 3.94 |
| Bolt Circle Diameter | 100 |
| Bolt Hole Diameter | 0.58 |
| Bolt Hole Diameter | 14.8 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 1.48 |
| Brake Surface Width | 37.5 |
| Center Hole Diameter | 2.17 |
| Center Hole Diameter | 55 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 7.13 |
| Maximum Brake Diameter (Discard) | 181 |
| Nominal Drum Diameter | 7.09 |
| Nominal Drum Diameter | 180 |
| Outer Cooling Fins | No |
| Outside Diameter | 8.64 |
| Outside Diameter | 219.5 |
| Overall Height | 1.91 |
| Overall Height | 48.5 |
| Rust Resistant Coating | No |
| Fits | Toyota · 2 vehicles |
Full cast construction. Delivers a solid, durable brake drum design.
Cast iron material. Provides dependable braking performance and heat handling.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Anchor 9709, Eastern Catalytic 80096 and 125733 for the same application. See all 10.
DuraGo BD80096 Rear Brake Drum
The DuraGo BD80096 brake drum is built for rear brake service on select 2000-2001 Toyota Echo models. Made from cast iron with a full cast construction, it provides the dimensional accuracy needed for a proper brake surface and consistent drum fit.
For shoppers searching for a rear brake drum for 2000-2001 Toyota Echo, BD80096 offers the key measurements and OE-style layout needed for a direct replacement application.
Key Features
- Cast iron construction for durable brake service
- Full cast design
- Nominal drum diameter: 180 mm (7.09 in.)
- Maximum brake diameter discard: 181 mm (7.13 in.)
- Outside diameter: 219.5 mm (8.64 in.)
- Brake surface width: 37.5 mm (1.48 in.)
- Bolt hole quantity: 4
- Bolt circle diameter: 100 mm (3.94 in.)
- Center hole diameter: 55 mm (2.17 in.)
- Overall height: 48.5 mm (1.91 in.)
Detailed Description
DuraGo BD80096 is a rear brake drum engineered for the 2000-2001 Toyota Echo. Its cast iron, full cast construction supports stable braking performance, while the listed drum and mounting dimensions help ensure proper fitment on the rear axle. DuraGo manufactures brake drums through ISO-certified factories and focuses on fit, form, and function for aftermarket brake service. This part cross-references Anchor 9709 for the same application.
Common Brake Issues This Drum Addresses
- Rear brake pulsation caused by worn drum surfaces
- Out-of-spec drum diameter from brake wear
- Reduced braking consistency from an uneven drum surface
- Noise or vibration related to drum wear
- Brake service on a 2000-2001 Toyota Echo rear brake system
Installation Notes and Tips
Verify drum diameter, bolt pattern, center hole diameter, and brake surface width before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and measure the existing drum against the discard specification before reuse or replacement. Confirm rear position fitment for the 2000-2001 Toyota Echo before ordering BD80096.
Quality Assurance
DuraGo brake drums are produced in ISO-certified factories and built to meet fit, form, and function requirements for aftermarket brake replacement. The BD80096 is part of DuraGo’s brake drum and rotor program, which is cataloged for professional repair applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Toyota | Echo | Rear | — |
| 2000 | Toyota | Echo | Rear | — |
| No rows match your filter. | ||||