/live/media/PR/PR_BD80111_Fro.jpg)
DuraGo BD80111 Brake Drum - Rear
| Brand | DuraGo BD80111 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.59 |
| Bolt Hole Diameter | 15 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 2.06 |
| Brake Surface Width | 52.2 |
| Center Hole Diameter | 2.44 |
| Center Hole Diameter | 62 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 9.08 |
| Maximum Brake Diameter (Discard) | 230.6 |
| Nominal Drum Diameter | 9 |
| Nominal Drum Diameter | 228.7 |
| Outer Cooling Fins | No |
| Outside Diameter | 10.93 |
| Outside Diameter | 277.6 |
| Overall Height | 2.54 |
| Overall Height | 64.5 |
| Rust Resistant Coating | No |
| Fits | Toyota · 5 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum design. Built for consistent stopping power and smooth operation.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9752, Anchor 9766 and Edelmann 80111 for the same application. See all 12.
DuraGo BD80111 Rear Brake Drum
The DuraGo BD80111 is a cast iron rear brake drum built for 2001-2005 Toyota RAV4 applications. It is sized for a 9-inch nominal drum diameter and a 2.06-inch brake surface width, giving you the dimensions needed for a direct rear brake service on the Toyota RAV4 rear axle.
Key Features
- Cast iron, full-cast construction for consistent braking performance
- Nominal drum diameter: 9 in. (228.7 mm)
- Maximum brake diameter discard: 9.08 in. (230.6 mm)
- Outside diameter: 10.93 in. (277.6 mm)
- Brake surface width: 2.06 in. (52.2 mm)
- 5-bolt pattern with 4.5 in. (114.3 mm) bolt circle diameter
- Center hole diameter: 2.44 in. (62 mm)
- Overall height: 2.54 in. (64.5 mm)
- Direct fit for rear brake service on 2001-2005 Toyota RAV4
Detailed Description
DuraGo manufactures this brake drum to meet fit, form, and function requirements through ISO-certified factory production. The BD80111 is part of DuraGo’s brake drum and rotor program, which focuses on catalog coverage and application-specific replacement parts for everyday brake repair. For drivers and technicians servicing a Toyota RAV4 rear brake system, this drum provides the correct dimensions and mounting layout for the listed applications.
This part cross-references Anchor 9752 and 9766 for the same application. The DuraGo BD80111 is also referenced in aftermarket catalogs under related numbers such as 80111 and BD80111, making it easier to match the correct rear brake drum for 2001-2005 Toyota RAV4 service work.
What This Brake Drum Helps Address
- Rear brake pulsation caused by drum wear or out-of-round condition
- Reduced braking consistency from a worn braking surface
- Brake noise related to drum surface damage
- Service replacement needs during rear brake maintenance on Toyota RAV4 models
- Fitment issues when replacing a damaged or non-serviceable rear drum
Installation Notes and Tips
Verify the drum diameter, bolt circle, center hole, and brake surface width against the existing part before installation. Inspect rear brake shoes, wheel cylinders, and related hardware during service, and confirm the drum surface is clean and free of contamination before assembly. This part fits 2001-2005 Toyota RAV4, rear.
Quality Assurance
DuraGo backs this brake drum with manufacturing standards focused on dimensional accuracy and application fitment. The part is produced in ISO-certified factories and built to meet the requirements of fit, form, and function for the listed Toyota RAV4 rear brake applications.
| Year | Make | Model | Fuel Type | Position | Notes |
|---|---|---|---|---|---|
| 2005 | Toyota | RAV4 | — | Rear | — |
| 2004 | Toyota | RAV4 | — | Rear | — |
| 2003 | Toyota | RAV4 | GAS | Rear | — |
| 2002 | Toyota | RAV4 | GAS | Rear | — |
| 2001 | Toyota | RAV4 | GAS | Rear | — |
| No rows match your filter. | |||||