/live/media/PR/PR_BD80112_Fro.jpg)
OE Quality
60-Day Returns
DuraGo BD80112 Brake Drum - Rear
Reliable Brake Drum for Ford EcoSport, Fiesta, and Focus
The DuraGo BD80112 brake drum is engineered to meet the braking needs of Ford EcoSport, Fiesta, and Focus models. Crafted from durable cast iron, this brake drum offers consistent performance and precise fitment for your vehicle's braking system.
- Constructed from full cast iron for strength and durability
- Nominal drum diameter of 203 mm (7.99 inches) ensures proper braking surface
- Outside diameter measures 243 mm (9.57 inches) for exact fit
- Brake surface width of 44.5 mm (1.75 inches) for effective braking contact
- Features 4 bolt holes with M12 x 1.5 bolt size and 108 mm (4.25 inches) bolt circle diameter
- Overall height of 80.8 mm (3.18 inches) designed for precise installation
Detailed Product Description
The DuraGo BD80112 brake drum is a full cast iron component designed specifically for select Ford models including the EcoSport, Fiesta, and Focus. Its robust construction provides reliable braking performance under normal driving conditions. The brake drum's nominal diameter of 203 mm and outside diameter of 243 mm ensure compatibility with the original braking system specifications. With a brake surface width of 44.5 mm, it offers sufficient contact area for brake shoes to deliver consistent stopping power. The drum includes four bolt holes sized for M12 x 1.5 bolts arranged on a 108 mm bolt circle diameter, matching factory mounting requirements. This brake drum does not include an ABS tone ring or rust-resistant coating, so it is intended for vehicles without ABS sensors and may require routine inspection for corrosion depending on environmental conditions.
Common Applications and Issues Addressed
- Replacement for worn or scored brake drums on Ford EcoSport, Fiesta, and Focus
- Resolves brake noise caused by uneven drum surfaces
- Addresses reduced braking efficiency due to drum wear or damage
- Corrects vibration or pulsation during braking from out-of-round drums
- Restores proper brake shoe contact and stopping power
Installation Notes and Tips
- Ensure vehicle compatibility with Ford EcoSport, Fiesta, or Focus models before installation
- Inspect brake shoes and hardware for wear and replace if necessary during drum installation
- Check drum diameter against maximum discard size of 204.3 mm (8.04 inches) to confirm usability
- Clean mounting surfaces and bolts to ensure secure fitment
- Follow manufacturer torque specifications for M12 x 1.5 bolts on the 108 mm bolt circle
Quality Assurance and Warranty
DuraGo brake drums are manufactured to meet or exceed OEM specifications for fit and function. The BD80112 part number undergoes quality control to ensure dimensional accuracy and material integrity. While this product does not include a rust-resistant coating, proper maintenance can extend service life. Warranty coverage details should be confirmed with the point of purchase or manufacturer documentation.
| Brand | DuraGo |
|---|---|
| Part Number | BD80112 |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.25 |
| Bolt Circle Diameter | 108 |
| Bolt Hole Quantity | 4 |
| Bolt Size | M12 x 1.5 |
| Brake Surface Width | 1.75 |
| Brake Surface Width | 44.5 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 8.04 |
| Maximum Brake Diameter (Discard) | 204.3 |
| Nominal Drum Diameter | 7.99 |
| Nominal Drum Diameter | 203 |
| Outer Cooling Fins | No |
| Outside Diameter | 9.57 |
| Outside Diameter | 243 |
| Overall Height | 3.18 |
| Overall Height | 80.8 |
| Rust Resistant Coating | No |
This part fits 23 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2011 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2010 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2009 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2009 | Ford | Fiesta | Rear | w/ Wheel Bearing |
| 2008 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2008 | Ford | Fiesta | Rear | w/ Wheel Bearing |
| 2008 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2007 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2007 | Ford | Fiesta | Rear | w/ Wheel Bearing |
| 2007 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2006 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2006 | Ford | Fiesta | Rear | w/ Wheel Bearing |
| 2006 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2005 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2005 | Ford | Fiesta | Rear | w/ Wheel Bearing |
| 2005 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2004 | Ford | EcoSport | Rear | w/ Wheel Bearing |
| 2004 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2003 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2002 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2001 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
| 2000 | Ford | Focus | Rear | w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur. |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.