/live/media/PR/PR_BD8200_Fro.jpg)
DuraGo BD8200 Brake Drum - Front or Rear
| Brand | DuraGo BD8200 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 4.5 |
| Bolt Circle Diameter | 114.3 |
| Bolt Hole Diameter | 0.61 |
| Bolt Hole Diameter | 15.6 |
| Bolt Hole Quantity | 5 |
| Brake Surface Width | 2.84 |
| Brake Surface Width | 72.1 |
| Center Hole Diameter | 2.44 |
| Center Hole Diameter | 62 |
| Construction | Composite |
| Material | Cast Iron / Steel Top |
| Maximum Brake Diameter (Discard) | 11.09 |
| Maximum Brake Diameter (Discard) | 281.69 |
| Nominal Drum Diameter | 11.03 |
| Nominal Drum Diameter | 280.2 |
| Outer Cooling Fins | No |
| Outside Diameter | 12.8 |
| Outside Diameter | 325 |
| Overall Height | 3.66 |
| Overall Height | 93 |
| Rust Resistant Coating | No |
| Fits | Ford, Lincoln, and Mercury · 26 vehicles |
Brake drum replacement. Built to meet fit, form, and function requirements.
Composite construction. Combines cast iron and steel for dependable braking performance.
ISO-certified manufacturing. Made in factories held to strict quality standards.
Cross-references Anchor 2620, Anchor 8200 and 60055 for the same application. See all 11.
DuraGo BD8200 Brake Drum Overview
The DuraGo BD8200 brake drum is built for classic Ford and Mercury applications that require a precise rear or front drum replacement. It combines a cast iron / steel top construction with OE-style dimensions to support proper brake surface contact and consistent drum fitment.
For buyers searching for a brake drum for 1965-1968 Ford LTD, 1967-1968 Ford Thunderbird, or 1966-1968 Mercury Colony Park and Marquis applications, the BD8200 provides the dimensional coverage needed for restoration and maintenance work. The DuraGo BD8200 is manufactured in ISO-certified factories with attention to fit, form, and function.
Key Features
- Cast iron / steel top construction for drum brake service
- Nominal drum diameter: 11.03 in. / 280.2 mm
- Maximum brake diameter (discard): 11.09 in. / 281.69 mm
- Outside diameter: 12.8 in. / 325 mm
- Brake surface width: 2.84 in. / 72.1 mm
- Bolt circle diameter: 4.5 in. / 114.3 mm
- 5-bolt hole pattern with 0.61 in. / 15.6 mm bolt holes
- Center hole diameter: 2.44 in. / 62 mm
- Overall height: 3.66 in. / 93 mm
- ABS tone ring not included
- Outer cooling fins not included
Detailed Description
DuraGo BD8200 is a brake drum replacement for select Ford and Mercury rear and front drum brake applications. It is dimensioned for vehicles including 1958-1960 Ford Thunderbird, 1963-1965 Mercury Marauder front, 1966 Mercury Marauder rear, 1965-1968 Ford LTD front and rear, 1967-1968 Ford Thunderbird rear, 1966-1968 Mercury Colony Park rear, and 1967-1968 Mercury Marquis front and rear. This part number also cross-references Anchor 2620 and 8200 for the same application.
As a brake drum, the BD8200 is used to restore the friction surface that the brake shoes contact during braking. Its composite construction and OE-style sizing help maintain proper drum geometry for classic Ford LTD and Mercury Marquis brake service, while the specified discard diameter gives a clear service limit for inspection.
What This Brake Drum Helps Address
- Brake pulsation or uneven braking caused by worn drum surfaces
- Out-of-spec drum diameter during brake inspection
- Reduced shoe contact from scoring or wear
- Brake service needs on classic Ford LTD, Thunderbird, and Mercury models
- Rear or front drum replacement on listed vintage applications
Installation Notes and Tips
Verify drum diameter, bolt circle, center hole, and brake surface width before installation. Confirm whether your vehicle uses the front or rear position listed for the application, since some models are covered in both positions and others are position-specific. Inspect brake shoes, wheel cylinders, and hardware condition before installing a new drum so the braking system can be serviced as a complete assembly.
For fitment-focused searches, this brake drum is a direct match for 1965-1968 Ford LTD, 1967-1968 Ford Thunderbird, and 1967-1968 Mercury Marquis brake drum replacement needs. The DuraGo BD8200 should be matched to the exact vehicle position shown in the fitment data.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and produces brake drums through ISO-certified factories. The brand emphasizes catalog accuracy and consistent fit, form, and function for professional brake service.
| Year | Make | Model | Submodel | Body Type | # Doors | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1968 | Ford | LTD | — | — | — | Front | — |
| 1968 | Ford | LTD | — | — | — | Rear | — |
| 1968 | Ford | Thunderbird | — | — | — | Rear | — |
| 1968 | Mercury | Colony Park | — | — | — | Rear | — |
| 1968 | Mercury | Marquis | — | — | — | Rear | — |
| 1968 | Mercury | Marquis | Base | — | — | Front | Exc. Heavy Duty & Police |
| 1968 | Mercury | Marquis | Base | Hardtop | 2 Door | Rear | — |
| 1967 | Ford | LTD | — | — | — | Front | — |
| 1967 | Ford | LTD | — | — | — | Rear | — |
| 1967 | Ford | Thunderbird | — | — | — | Rear | — |
| 1967 | Mercury | Colony Park | — | — | — | Rear | — |
| 1967 | Mercury | Marquis | — | — | — | Rear | — |
| 1967 | Mercury | Marquis | — | — | — | Rear | Exc. Police; Exc Heavy Duty |
| 1967 | Mercury | Marquis | Base | — | — | Front | Exc. Heavy Duty & Police |
| 1966 | Ford | LTD | — | — | — | Front | — |
| 1966 | Ford | LTD | — | — | — | Rear | — |
| 1966 | Mercury | Colony Park | — | — | — | Rear | — |
| 1966 | Mercury | Marauder | — | — | — | Rear | — |
| 1965 | Ford | LTD | — | — | — | Front | — |
| 1965 | Ford | LTD | — | — | — | Rear | — |
| 1965 | Mercury | Marauder | — | — | — | Front | — |
| 1964 | Mercury | Marauder | — | — | — | Front | — |
| 1963 | Mercury | Marauder | — | — | — | Front | — |
| 1960 | Ford | Thunderbird | — | — | — | Front | — |
| 1959 | Ford | Thunderbird | — | — | — | Front | — |
| 1958 | Ford | Thunderbird | — | — | — | Front | — |
| No rows match your filter. | |||||||